[jcassity]

answer :
the resistor R102 magically appears as per a statement that it was "added"

progression of power supplies from oldest to newest from below pic left to right.

what i dont understand is thier far right statement, it says the power supply was changed "to" the diagram below.
If i follow instructions,, i only have two wires from the power supl xfrmr to the V8 rectifier tube???????
also on the far right they rotated the tube,, but did not lable the pins.

The middle picture  shows the rectifier tube as:
top left pin as 4
top right pin as 6
bottom left pin as 2
bottom right as 8

the far right which represents how i am to wire things up on my system,,
the dont tell me what pins are what on the rect tube.
They rotated the rect tube so by assumption i see pins 4 & 6

on the far right the little j hook they show on the rectifier tube must be pin 8 ???????

on the far right if i follow instructions,, they are saying to hook nothing up to pin 2 ????????

also on the far right above R101, is that output transformer they mention meaning my smaller "audio output" xfrmr???

if i follow instructions,, the code 122 prints show a power supl transformer with 12 conductors.
--- i have a transformer with 10 total conductors
--- if i continue to follow instructions, of my 10 conductors i would only use 9.
~~if above true this matches up perfectly to what i have in my system being restored.