04-11-2017, 07:26 AM
>Question about the .5 UF 50 Volt caps..can they be replaced with 0ne .5 uf cap?
No because the 2 of them in parallel =1uf.
>why would they do this ??
It looks to be a filter to eliminate vibrator noise from getting back into the dc power source (6v or 12v). SW201 is the power switch. A switches the 120vac when it's being powered from the AC line. B switches the power from the DC source. If you are not going to use it in your car I wouldn't lose any sleep over it.
No because the 2 of them in parallel =1uf.
>why would they do this ??
It looks to be a filter to eliminate vibrator noise from getting back into the dc power source (6v or 12v). SW201 is the power switch. A switches the 120vac when it's being powered from the AC line. B switches the power from the DC source. If you are not going to use it in your car I wouldn't lose any sleep over it.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
