[jcassity]

started picking on my transformer today, i was able to verify all the wiring.
I believe its confirmed i have a replacement xfrmr, no name plate data , no pn no sn , no Philco stamping ,, nothing.
my transformer secondary looks like this...
qty1) 800v secondary with center tap (400v/400v)
qty1) 5.7v secondary
qty1) 7.2v secondary with center tap (3.6v/3.6v)
I temp powered up and color coded my wiring.
My older complaint of having a transormer conductor spared back is correct, this would be the center tap on teh 7.2v section and its not going to be needed, i actually painted that wire insulation brown then put on clear heat shrink.  I didnt have any brown heat shrink.

the transformer seems to be wroking just fine.