[jcassity]

gutted out my secondary winding of my audio output transformer to get access to the primary blue wire terminal. , found the main wire to the thin hair broke and some corrosion.  Was glad to see that and made a repair.
No change in resistivity from org to blue so theres another break somewhere.  My meter isnt showing a steady reading,, its slowly increasing like before.  as said,, bad primary.

up on post 72, there is a pic of my audio output transformer

the pn is 32-8274

primary with center tap
blue to org supposed to be 238 ohms at 225v
white to org supposed to be 262 ohms at 238v

secondary , one bonded to xfrmer chasiss and one which is called out to be green is to be .7ohms.

back on 11-29-2014, 10:58 PM, Morzh posted a reply to someone about the audio transformer pn i have.
see below in bold........

I am not thinking the 9000 secondary impedance is correct, just checking / asking...

sorry to be redundunt ,, just want to find something that is a direct replacement.
check play things of the past and he has several "like" mine but not seeing anything with resistances like i have.

play things of the past has a boat load of transformers,, hard picking though.


?>>>>>>>>>>>>
<P>Philco output transformer 32-8274: Primary impedance: 9000, Secondary impedance: 3.5. Power is not listed for this transformer, but similar physical sized ones are rated at 15 watts


(from the other forum archives)


Which tells me 125 seies PP transformer (higher wattage model) will do.


125E.


Connect Voice coil to 2 and 4.


http://www.radiodaze.com/category/570.aspx


Is the below still true?