It is time: The Fisher TA-600

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

It is time: The Fisher TA-600

Ron Ramirez
Silent Key

Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand State, Province, Country: Indiana

#107

04-27-2017, 08:07 PM

Tim

No problem, glad you checked in, thanks for your thoughts. Icon_smile

It was one of the used-tested 6П14П tubes that was red plating. This was before I learned that the 6П14П has lower ratings than the 6П14П-EB. It now has a new set of 6П14П-EB tubes. I ran it for around 20 minutes or so earlier during (and after) adjusting the IBAM trimpots, and I never saw any hint of red in any of the 6П14П-EB tubes.

So...did you ever find a power tranny for your Fisher 500-C?

As for this TA-600: I've installed the inrush current limiter and it is playing right now through a bucking transformer (107.4 volts instead of 125). In a few minutes, I'm going to shut it off and button it up (reinstall bottom cover, front panel, and reinstall in case). Having re-cleaned the Selector and Mono-Stereo switches, the left channel is now coming up along with the right as the tubes warm up. No more snap, crackle, or pop. Icon_thumbup

--
Ron Ramirez
Ferdinand IN

Find

« Next Oldest | Next Newest »

Messages In This Thread

It is time: The Fisher TA-600 - by Ron Ramirez - 04-02-2017, 05:02 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-02-2017, 05:07 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-02-2017, 05:10 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-02-2017, 05:14 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-02-2017, 05:17 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-02-2017, 05:30 PM

RE: It is time: The Fisher TA-600 - by KCMike - 04-02-2017, 05:37 PM

RE: It is time: The Fisher TA-600 - by Mondial - 04-02-2017, 06:44 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-02-2017, 07:02 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-02-2017, 07:06 PM

RE: It is time: The Fisher TA-600 - by morzh - 04-02-2017, 08:03 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-02-2017, 09:48 PM

RE: It is time: The Fisher TA-600 - by Arran - 04-05-2017, 02:52 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-05-2017, 06:21 AM

RE: It is time: The Fisher TA-600 - by rocketeer - 04-04-2017, 11:12 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-04-2017, 07:48 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-04-2017, 08:34 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-05-2017, 06:17 AM

RE: It is time: The Fisher TA-600 - by gregb - 04-04-2017, 08:39 PM

RE: It is time: The Fisher TA-600 - by Arran - 04-05-2017, 02:12 AM

RE: It is time: The Fisher TA-600 - by morzh - 04-05-2017, 08:50 AM

RE: It is time: The Fisher TA-600 - by Arran - 04-06-2017, 09:58 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-05-2017, 06:15 AM

RE: It is time: The Fisher TA-600 - by morzh - 04-04-2017, 09:53 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-04-2017, 11:09 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-06-2017, 07:25 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-06-2017, 07:42 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-06-2017, 09:11 PM

RE: It is time: The Fisher TA-600 - by morzh - 04-06-2017, 10:31 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-07-2017, 10:15 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-08-2017, 05:23 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-09-2017, 09:47 PM

RE: It is time: The Fisher TA-600 - by Arran - 04-10-2017, 05:03 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-12-2017, 06:14 AM

RE: It is time: The Fisher TA-600 - by TV MAN - 04-11-2017, 10:06 PM

RE: It is time: The Fisher TA-600 - by Arran - 04-11-2017, 11:15 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-12-2017, 11:00 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-12-2017, 05:24 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-12-2017, 06:07 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-12-2017, 06:29 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-12-2017, 07:53 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-12-2017, 08:13 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-14-2017, 10:10 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-15-2017, 08:42 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-15-2017, 08:46 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-15-2017, 08:48 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-15-2017, 10:11 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-16-2017, 05:14 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-16-2017, 05:26 PM

RE: It is time: The Fisher TA-600 - by morzh - 04-16-2017, 09:01 PM

RE: It is time: The Fisher TA-600 - by Ed Locker - 04-17-2017, 09:40 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-17-2017, 09:46 AM

RE: It is time: The Fisher TA-600 - by morzh - 04-17-2017, 10:43 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-17-2017, 01:56 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-17-2017, 07:33 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-17-2017, 07:47 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-17-2017, 08:17 PM

RE: It is time: The Fisher TA-600 - by rocketeer - 04-17-2017, 08:53 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-17-2017, 09:02 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-17-2017, 09:36 PM

RE: It is time: The Fisher TA-600 - by morzh - 04-17-2017, 10:47 PM

RE: It is time: The Fisher TA-600 - by Mondial - 04-18-2017, 12:12 AM

RE: It is time: The Fisher TA-600 - by Arran - 04-20-2017, 11:24 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-18-2017, 09:59 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-19-2017, 07:45 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-19-2017, 09:52 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-20-2017, 06:17 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-20-2017, 09:20 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-20-2017, 09:56 PM

RE: It is time: The Fisher TA-600 - by morzh - 04-20-2017, 10:01 PM

RE: It is time: The Fisher TA-600 - by Arran - 04-20-2017, 11:31 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-21-2017, 08:09 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-21-2017, 08:14 AM

RE: It is time: The Fisher TA-600 - by morzh - 04-21-2017, 08:22 AM

RE: It is time: The Fisher TA-600 - by Mondial - 04-21-2017, 08:28 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-21-2017, 09:31 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-21-2017, 09:46 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-21-2017, 12:39 PM

RE: It is time: The Fisher TA-600 - by morzh - 04-21-2017, 12:57 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-21-2017, 08:55 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-21-2017, 09:04 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-21-2017, 09:14 PM

RE: It is time: The Fisher TA-600 - by morzh - 04-21-2017, 09:41 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-21-2017, 09:52 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-22-2017, 12:04 PM

RE: It is time: The Fisher TA-600 - by morzh - 04-22-2017, 01:31 PM

RE: It is time: The Fisher TA-600 - by Mondial - 04-22-2017, 03:05 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-22-2017, 03:13 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-22-2017, 03:32 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-22-2017, 06:09 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-22-2017, 07:42 PM

RE: It is time: The Fisher TA-600 - by morzh - 04-22-2017, 08:06 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-22-2017, 10:01 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-23-2017, 01:38 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-24-2017, 08:32 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-26-2017, 08:17 PM

RE: It is time: The Fisher TA-600 - by Mondial - 04-26-2017, 10:50 PM

RE: It is time: The Fisher TA-600 - by TV MAN - 04-27-2017, 07:57 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-27-2017, 09:15 AM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-27-2017, 02:22 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-27-2017, 02:34 PM

RE: It is time: The Fisher TA-600 - by Mondial - 04-27-2017, 02:46 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-27-2017, 03:01 PM

RE: It is time: The Fisher TA-600 - by Mondial - 04-27-2017, 03:12 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-27-2017, 03:54 PM

RE: It is time: The Fisher TA-600 - by TV MAN - 04-27-2017, 07:55 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-27-2017, 08:07 PM

RE: It is time: The Fisher TA-600 - by morzh - 04-27-2017, 10:22 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-27-2017, 10:28 PM

RE: It is time: The Fisher TA-600 - by morzh - 04-28-2017, 07:52 AM

RE: It is time: The Fisher TA-600 - by TV MAN - 04-28-2017, 05:40 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-28-2017, 08:55 PM

RE: It is time: The Fisher TA-600 - by rocketeer - 04-28-2017, 09:19 PM

RE: It is time: The Fisher TA-600 - by gregb - 04-28-2017, 09:32 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-28-2017, 11:29 PM

RE: It is time: The Fisher TA-600 - by rocketeer - 04-29-2017, 08:56 AM

RE: It is time: The Fisher TA-600 - by Arran - 04-30-2017, 06:38 PM

RE: It is time: The Fisher TA-600 - by Ron Ramirez - 05-28-2017, 12:05 PM

View a Printable Version

Users browsing this thread: 10 Guest(s)

Recent Posts
Philco 16B Parts
I think the chassis is painted.morzh — 08:13 PM
Philco 38-2 Automatic Tuning
Honestrly, the original is quite acceptable and, it seems to me, can be cleaned.morzh — 08:11 PM
Philco 41-608 changer coupler
Mondial left a thread about remanufacturing thois type coupler.morzh — 08:09 PM
IF can wire size and Rubber mounts?
Are you talking about rewinding or rewiring? For rewiring, meaning runnin wires to the coil from other components, the ...morzh — 08:08 PM
12' Philco
I wonder who would be able to "no stoop" with this one.morzh — 08:05 PM
IF can wire size and Rubber mounts?
Hello PHORUM members, I am still working on restoration of my PHILCO 37-640. I want to start with rewiring the IF ca...georgetownjohn — 06:32 PM
Philco 41-608 changer coupler
I am working on a Philco 41-608 with the gear-driven changer. The coupling (#35-2220) between the motor assembly and th...alangard — 06:29 PM
Gilfillan Brothers Car Radio?
There is a Mission Bell model 19/19A that could be what you’re looking for, Riders vol 4. It has the tube line-up of: 0Z...Joe Rossi — 05:01 PM
Looking for verification of correct schematic.
Definitely 870044RossH — 01:12 PM
12' Philco
Wonder if the chassis was big too.daveone23 — 12:38 PM

Who's Online

There are currently 2223 online users. [Complete List]
» 5 Member(s) | 2218 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me