Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Claude
I believe what you have is a model 223, not a 71.
You can find a schematic here (not very good quality but better than nothing):
https://elektrotanya.com/philco_271_222_...nload.html
There is also a partial schematic shown for versions with a phonograph pickup.
--
Ron Ramirez
Ferdinand IN
Messages In This Thread
RE: PHILCO 23X meuble 1938 - by Ron Ramirez - 06-29-2017, 01:47 PM
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Philco 42-345 Restoration/Repair
|
| Regarding picture 5 on page 1 of this thread this capacitor is #40 on scematics diagram - 4mF+4mF. Black wire is "-...Vlad95 — 09:01 PM |
|
Philco 42-345 Restoration/Repair
|
| That's a dual 4 MFD, red and green are both 4mfd and black is common negative. You should be able to see them in the pow...RodB — 08:58 PM |
|
Philco 42-345 Restoration/Repair
|
| Can anyone help me figure out a capacitor that has 3 wires coming out of it red and green on one side and a black wire o...osanders0311 — 08:14 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| The transformer may be the last cause of voltage drop.
This level of voltage drop is not too big. Conduct additional te...Vlad95 — 07:16 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| Well I have found 315v on the rectifier when cold. Drops off to 280 after 15 minute warmup.
Checked pin 3 on both 6F6 t...murf — 04:14 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| Thanks for the replies, I will check these ideas out and report back.
murfmurf — 03:18 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| Sorry, my mistake.
murfmurf — 03:07 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| MrFixr
Honestly, I haven't done that yet and do not want to screw up the threads; maybe you could do it, or we could...morzh — 12:48 PM |
|
Two small radios from France. Restoration and review.
|
| Greetings;
I think that it's possible that the assortment of components was the result of post war parts shortages, a...Arran — 12:18 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Unfortunately I can't inject any audio into the volume control. It is in the primary circuit of the antenna coil, not in...Stormlord5500 — 09:32 AM |
|
Who's Online
|
There are currently 310 online users. [Complete List]
» 1 Member(s) | 309 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
