[vecher]

Ok Terry...

I measured the following   # 7  108.5 Ohms ( in circuit cap read .47 ) This is not removing the ground ..
                                         # 12 103.1 Ohms ( in circuit cap read .47 ) This is not removing the ground
                                         # 17  123.4 Ohms ( in circuit cap read .47 ) This is not removing the ground

So the caps appear not shorted.. Since the Cap and resistor are one should I leave as is??

I removed the ground from # 7 and remeasured it reads .147 now..

The 2 output Transformers read  # 22  1346 Ohms in and 5.3 K out..
                                                    # 25  1385 Ohms in and 5.3 K out..

The Transformer to the 80 Tube  Pins 2 to 3  346 Ohms.. to CTR tap about 170 each leg,,

Skip...