Posts: 16,533
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
The volume control with the wheel looks exactly as the one I had on my 111, and all these early radios shared a very similar chassis.
The pot was very worn, had several times the resistance against the declared value and went fully open after one light swab with alcohol. So if yours is still conducting at an acceptable level, maybe some fader lube Deoxit, but no cleaning.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Messages In This Thread
RE: Philco 514 - by morzh - 07-24-2017, 11:46 AM
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
philco predicta
|
I found that where I have the 140v B+ there is 50v and the tuner receives 235v through the orange cablecgl18 — 04:14 PM |
Philco 91 code 221
|
Chassis grounds thru rivets is another good place to look. Oh and the stator screws on the tuning cap where the leads at...Radioroslyn — 08:11 AM |
Philco 91 code 221
|
Dirty tube pins and socket, cold solder joint, stray tiny strand of wire, clean the entire area around the oscillator tu...RodB — 08:43 PM |
Philco 91 code 221
|
I have been restoring one of these sets and switched it on yesterday. It didn't exactly spring into life, but after a co...Philconut — 08:26 PM |
Philco 50-925 antenna connections
|
That's super. Glad to hear you figured it out. Paul.Paul Philco322 — 11:11 AM |
Philco 50-925 antenna connections
|
Hello Keith,
great news !!
Sincerely Richardradiorich — 02:14 AM |
Philco 50-925 antenna connections
|
Finally, got the antenna fixed (repaired some broken wires) and have the radio playing. I've got four different schemat...keith49vj3 — 09:38 PM |
1949 Motorola 5A9M
|
Bob, Nice radio. I’ve not seen one before. Keep us updated!Joe Rossi — 07:56 PM |
Phioco 90 Power Transformer Wire Colors
|
Thanks for adding that information.klondike98 — 06:09 PM |
Phioco 90 Power Transformer Wire Colors
|
Although I have used this site as a resource for a number of years this is my first post. I am restoring a Model 90 si...vincer — 05:02 PM |
Who's Online
|
There are currently no members online. |
|

|