07-25-2017, 08:23 AM
Hi Matt and welcome to the Phorum,
Here is the service info for your set http://www.nostalgiaair.org/pagesbymodel...013614.pdf to get started. Imho the phono is somewhat expensive to fix (most need an unavailable cartridge) and some rubber parts that could be around $50. It will only play 78rpm records.
At the end of the service info there is a parts list. Look for listings for condenser that the value is listed in mf or mfd write these down on your things to get list. Ignore condensers listed as mmf or mmfd.
Check ur pm box.
Here is the service info for your set http://www.nostalgiaair.org/pagesbymodel...013614.pdf to get started. Imho the phono is somewhat expensive to fix (most need an unavailable cartridge) and some rubber parts that could be around $50. It will only play 78rpm records.
At the end of the service info there is a parts list. Look for listings for condenser that the value is listed in mf or mfd write these down on your things to get list. Ignore condensers listed as mmf or mmfd.
Check ur pm box.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
