08-17-2017, 10:10 PM
>i can't get any stations on the lower numbers 560-710.
If you connect your antenna to the grid cap of the 6A8 can you receive stations at the lower end of the bcb??
A weak 6A8 could cause this situation. Also using a tube extender to access the tube pins from the top to measure the dc voltages at the 6A8.
> I can't seem to get any movement on the antenna adjustments
Don't understand your question. No adjustments on the sub chassis will move your antenna. Pls restate.
If you connect your antenna to the grid cap of the 6A8 can you receive stations at the lower end of the bcb??
A weak 6A8 could cause this situation. Also using a tube extender to access the tube pins from the top to measure the dc voltages at the 6A8.
> I can't seem to get any movement on the antenna adjustments
Don't understand your question. No adjustments on the sub chassis will move your antenna. Pls restate.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
