Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My first ever Antique Radio purchase - a PHILCO!!
#3

I added the 71A very shortly after. I posted a sequel to the story on Facebook which I'll paste here:

"A small sequel to the story: It wasn't long before I obtained a replacement 71A and cheap. Toronto had an amazing "radio row" back then. In those days it was no big deal for a 13 year old to take the bus from the 'burbs and hang out downtown on a Saturday. This one place on the row had a huge bin of 'obsolete' tubes for 25 cents each. My limited knowledge of antique tubes at the time was that any tube with two digits was gold, so I passed on the 2A3's, 6A3's, etc. (moan!!) and picked up about 20 tubes including a 71A."

I was a 13 year old newbie at the time and so the term 'recapping' did not exist. One did whatever it took to get the thing working. I don't really know why, but I've kept the radio in storage all of these long years without working on it at all. I suppose one day I should throw in some new filter caps and fire it up.


Messages In This Thread



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4119 online users. [Complete List]
» 2 Member(s) | 4117 Guest(s)
AvatarAvatar

>