Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco phono model D10A needles
#2

While the 46-1203 and the 46-1209 share the same D10A turntable, the 1209 uses a different tone arm than the 1203. The 1209 uses the dynamic reproducer, while the 1203 uses a standard crystal cartridge. The dynamic reproducer cartridge takes a very special needle that is nearly impossible to find today. Inserting any other needle into the cartridge will ruin it. I don't know of any modern replacement needle that will work (but possibly other's here with more experience on these changers do). You'd probably need to find an NOS Philco needle for the dynamic reproducer.

Otherwise, you will need to replace the cartridge in yours and not just the needle. Here's a recent video of a restorer from Salt Lake City that is making the conversion from the dynamic reproducer cartridge to a modern replacement on a 47-1230 (which is virtually identical to your 46-1209, just that the 1230 adds FM along with AM and short wave bands to the radio):

https://www.youtube.com/watch?v=HUlzAryWBKY

Greg V.
West Bend, WI
Member WARCI.org


Messages In This Thread
Philco phono model D10A needles - by WallaceRoger - 10-11-2017, 01:01 PM
RE: Philco phono model D10A needles - by NostalgiaRadioTime - 10-11-2017, 06:43 PM
RE: Philco phono model D10A needles - by Warren - 10-11-2017, 07:08 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural....morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM
Shadow Meter Bulb
Ross I am not sure what current limiting effect the incandescent provides. They are two different parts of the sch...morzh — 08:31 PM
12' Philco
Bob Thanks for that photo. I have been looking for it, and I cannot find anythinmg on the web. I forgot it was here...morzh — 08:29 PM
Shadow Meter Bulb
I think after all has been said, I will use the same bulb that is specified for the dial pilot light which is a #55. I ...georgetownjohn — 07:31 PM
12' Philco
There was also this Philco! klondike98 — 07:25 PM
HiFi (Chifi) tube amp build - but my own design.
I expected a challenge and this is just part of it. But, it's also supposed to be fun, entertaining, informative and enj...TV MAN — 07:12 PM
Shadow Meter Bulb
Butting in here with a question. Since the shadow meter is connected directly to the 1st and 2nd I.F.'s wouldn't the met...RossH — 06:43 PM
HiFi (Chifi) tube amp build - but my own design.
Mike, Tim; you are about to enter the twilight zone. Doo doo doo doo, doo doo doo doo This is something alright. I'm go...RodB — 06:26 PM

[-]
Who's Online
There are currently no members online.

>