[Electrothaumaturgist]

Another small discrepancy in the schematics... bakelite capacitor, parts list#31 shows a single .3uf, part# 6287DG. Schematics show a single .3uf also. In the actual rf section is a double .15uf, part# 6287DU.  but, they put a jumper from lugs 2 to 3 to acquire .3   They must have run out of .3's at the factory perhaps? Not really a problem, but thought I'd make a note of it.    Was this rather common practice if parts ran low? Thanks.
Jim