[Harlan]

Excellent, E-x-c-e-l-l-e-n-t...EXCELLENT explantion, Sean !!!

That helps tremenously. Yes the drawing is confusing so am just going to go with your explantion and wire
it accordingly. That diagram apparently also isn't showing the record capable version.

Just going to take a length of cable with an RCA connector on the end and wire it into the 4 pin plug
that I bought (the crusty old grungy chunk). Then take a piece of light mike cable and wire one end
into the jack (wide spaced pins) and put a Motorola plug on the other end to go into the mating
connector on the back of the chassis.

I will just do the lamp power leads the way they were unless I need to modify something else.

Hopefully this will work out well especially since this isn't the original transformer type... otherwise
may have to "punt" and find another method.

Again, thanks very much!