12-06-2017, 02:26 PM
You are talking of the 0.1uF cap that goes to that 2,800 ohm pot with 500 ohm in parallel.
This will not measure correctly at all if in-circuit. You have to measure it disconnected at least at one end. It is likely good.
This will not measure correctly at all if in-circuit. You have to measure it disconnected at least at one end. It is likely good.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
