37-650 Issues

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

37-650 Issues

Steve Chambers
Member

Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio

01-27-2006, 08:01 AM

Scott:

Where are you measuring these AC voltages? Shouldn't be AC on anything except the heater pins and the rectifier. Maybe your meter is set wrong? If you measure overly high DC voltage on the screens and plates then tubes aren't drawing current. I would suspect a wiring error since you said you replaced all of it. You're going to have to trace it all out very carefully, I think. Icon_sad

Hang in there, it's a great radio, have one on my "bench" now.

Steve Chambers

Find

« Next Oldest | Next Newest »

Messages In This Thread

37-650 Issues - by Robbie Roberts - 01-27-2006, 07:06 AM

[No subject] - by Steve Chambers - 01-27-2006, 08:01 AM

[No subject] - by Robbie Roberts - 01-27-2006, 12:07 PM

[No subject] - by Steve Chambers - 01-27-2006, 12:21 PM

[No subject] - by Robbie Roberts - 01-27-2006, 12:32 PM

[No subject] - by Robbie Roberts - 01-27-2006, 06:02 PM

[No subject] - by Steve Chambers - 01-27-2006, 06:23 PM

[No subject] - by Robbie Roberts - 01-27-2006, 06:29 PM

[No subject] - by Steve Chambers - 01-27-2006, 06:38 PM

[No subject] - by Robbie Roberts - 01-27-2006, 06:41 PM

[No subject] - by Robbie Roberts - 01-27-2006, 06:51 PM

[No subject] - by Steve Chambers - 01-27-2006, 07:05 PM

[No subject] - by Robbie Roberts - 01-27-2006, 07:44 PM

[No subject] - by Robbie Roberts - 01-27-2006, 09:07 PM

[No subject] - by Robbie Roberts - 01-30-2006, 05:12 PM

[No subject] - by Chuck Schwark - 01-30-2006, 07:53 PM

[No subject] - by Steve Chambers - 01-30-2006, 07:59 PM

[No subject] - by Robbie Roberts - 01-30-2006, 08:02 PM

[No subject] - by Chuck Schwark - 01-30-2006, 08:12 PM

[No subject] - by Robbie Roberts - 01-31-2006, 12:52 AM

[No subject] - by Chuck Schwark - 01-31-2006, 09:57 AM

[No subject] - by Robbie Roberts - 01-31-2006, 11:43 AM

[No subject] - by Robbie Roberts - 01-31-2006, 06:40 PM

[No subject] - by Steve Chambers - 01-31-2006, 08:53 PM

[No subject] - by Robbie Roberts - 02-02-2006, 09:24 AM

[No subject] - by Steve Chambers - 02-02-2006, 05:00 PM

[No subject] - by Chuck Schwark - 02-02-2006, 05:47 PM

[No subject] - by Robbie Roberts - 02-02-2006, 06:24 PM

[No subject] - by Chuck Schwark - 02-02-2006, 07:42 PM

[No subject] - by Robbie Roberts - 02-02-2006, 07:43 PM

[No subject] - by Robbie Roberts - 02-02-2006, 08:36 PM

[No subject] - by Chuck Schwark - 02-02-2006, 10:22 PM

[No subject] - by Robbie Roberts - 02-02-2006, 11:03 PM

[No subject] - by Bill Hutchinson - 02-03-2006, 03:20 PM

[No subject] - by Robbie Roberts - 02-03-2006, 03:26 PM

[No subject] - by Bill Hutchinson - 02-03-2006, 07:08 PM

[No subject] - by Robbie Roberts - 02-04-2006, 08:29 AM

[No subject] - by Robbie Roberts - 02-05-2006, 01:42 AM

[No subject] - by 49Stude63 - 02-05-2006, 11:07 AM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean. Can you explain what you are really saying. If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM
Made mistake & did not label connection
Maybe this is starting to make some sense in my hard head. Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM
Made mistake & did not label connection
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM
Made mistake & did not label connection
Hello John, I have been there either label got lost or was not labeled ! Sincerely Richardradiorich — 02:15 PM
Made mistake & did not label connection
Sorry, it is a Philco 37-640. Does that help?--Johngeorgetownjohn — 02:14 PM

Who's Online
There are currently no members online.

Login
Username:
Password:	Lost Password?
	Remember me