Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Question on 221 Console Speaker Table
#1

I'm new to this forum, thanks for inviting me in. I have 17 Philcos of assorted models and years in my collection.

Here is my first question. I have a Philco model 221Console Grand speaker table I purchased a while back and I am working on restoring it as the antique store I bought it from found it in a barn and decided to faux finish it in a sick yellow color. it has all the original hardware as far as I can tell and is structurally sound but I am puzzled as to the speaker element itself. Was there originally a speaker mounted in the cabinet or do you set a 211 speaker inside of it as there is no hardware or screw holes to tell me where to mount a speaker. Can anyone tell me what type speaker it had or would have picture of the inside that shows how to mount it?

Thanks.

Gary


Messages In This Thread
Question on 221 Console Speaker Table - by findanotherphilco - 02-05-2018, 09:07 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM

[-]
Who's Online
There are currently 3260 online users. [Complete List]
» 5 Member(s) | 3255 Guest(s)
AvatarAvatarAvatarAvatar
Avatar

>