Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Paint stripper
#6

The idea that any stripper is environmentally friendly is a farce. It might be "green" before you use it, but after it contains the old finish it is not.

I have found that these green strippers work poorly, requiring the use of other solvents and much more of the stripper. That coupled with my previous statement make them not only un-green, but a poor substitute for a real stripper.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/


Messages In This Thread
Paint stripper - by 45philcodon - 01-05-2018, 03:03 PM
RE: Paint stripper - by rfeenstra - 01-05-2018, 04:36 PM
RE: Paint stripper - by 45philcodon - 01-05-2018, 05:47 PM
RE: Paint stripper - by Arran - 01-06-2018, 01:06 AM
RE: Paint stripper - by tbone - 02-14-2018, 06:36 PM
RE: Paint stripper - by Phlogiston - 02-15-2018, 10:38 AM
RE: Paint stripper - by Paul Philco322 - 02-15-2018, 08:09 PM
RE: Paint stripper - by tbone - 02-16-2018, 08:26 PM
RE: Paint stripper - by doug-5er - 02-26-2018, 08:21 PM
RE: Paint stripper - by oscartg - 05-18-2018, 11:24 AM
RE: Paint stripper - by Phlogiston - 05-18-2018, 11:45 AM
RE: Paint stripper - by John Bartley - 05-18-2018, 02:11 PM
RE: Paint stripper - by tbone - 05-19-2018, 07:04 AM
RE: Paint stripper - by 45philcodon - 05-20-2018, 04:23 PM
RE: Paint stripper - by Greggshere - 09-01-2018, 08:37 PM
RE: Paint stripper - by tbone - 09-02-2018, 05:06 PM
RE: Paint stripper - by Phlogiston - 09-02-2018, 07:02 PM
RE: Paint stripper - by Ron Ramirez - 09-02-2018, 08:57 PM
RE: Paint stripper - by Arran - 09-03-2018, 03:45 AM
RE: Paint stripper - by Greggshere - 09-10-2018, 10:15 AM
RE: Paint stripper - by Phlogiston - 09-10-2018, 02:59 PM
RE: Paint stripper - by Greggshere - 09-10-2018, 03:31 PM
RE: Paint stripper - by Phlogiston - 09-10-2018, 06:29 PM
RE: Paint stripper - by Arran - 09-11-2018, 02:46 AM
RE: Paint stripper - by Greggshere - 09-11-2018, 10:01 AM
RE: Paint stripper - by Phlogiston - 09-11-2018, 11:29 AM
RE: Paint stripper - by Greggshere - 09-11-2018, 03:52 PM
RE: Paint stripper - by Radioroslyn - 09-11-2018, 05:51 PM
RE: Paint stripper - by Phlogiston - 09-11-2018, 06:39 PM
RE: Paint stripper - by Ron Ramirez - 09-11-2018, 06:58 PM
RE: Paint stripper - by Radioroslyn - 09-11-2018, 07:14 PM
RE: Paint stripper - by Greggshere - 09-11-2018, 11:33 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>