03-10-2018, 12:09 AM
Thanks Bob (and Ed, and Russ). Bob, I agree regarding model 18 - if film will fit, they should be used.
OK folks, this is a 38-690 so appearance counts. No caps with studs on top - they need to be stuffed inside original cans. The Solen Fast 10 uF, 630 VDC caps have a smaller diameter than the Arcotronics/Kemet 10 uF, 630 VDC yellow film caps from Mouser. Any reasons why I should not pick the Solens?
Solen - 1.07" D x 1.88" L
Kemet - 1.36" D x 2.28" L
Links:
https://www.tubesandmore.com/products/ca...ylene-fast
https://www.mouser.com/ProductDetail/Arc...aZdPERw%3d
OK folks, this is a 38-690 so appearance counts. No caps with studs on top - they need to be stuffed inside original cans. The Solen Fast 10 uF, 630 VDC caps have a smaller diameter than the Arcotronics/Kemet 10 uF, 630 VDC yellow film caps from Mouser. Any reasons why I should not pick the Solens?
Solen - 1.07" D x 1.88" L
Kemet - 1.36" D x 2.28" L
Links:
https://www.tubesandmore.com/products/ca...ylene-fast
https://www.mouser.com/ProductDetail/Arc...aZdPERw%3d
--
Ron Ramirez
Ferdinand IN