04-08-2018, 06:53 PM
>For example, the filter choke (part 70) measures 562 ohms.
Have you measured it out of the circuit? I don't see anything that is connected directly to it that would effect it but maybe something down the line. In general 1400 ohm is a lot resistance for the filter choke. Most of the ones I've seen in sets have been a few hundred ohms. Fc generally are in that higher resistance range. Maybe a misprint?
Agree w/the wire wound resistors vs the carbon and would leave them. The acceptation is w/the candohm style, they can show the proper resistance but be shorted thru the metal cover.
GL
Have you measured it out of the circuit? I don't see anything that is connected directly to it that would effect it but maybe something down the line. In general 1400 ohm is a lot resistance for the filter choke. Most of the ones I've seen in sets have been a few hundred ohms. Fc generally are in that higher resistance range. Maybe a misprint?
Agree w/the wire wound resistors vs the carbon and would leave them. The acceptation is w/the candohm style, they can show the proper resistance but be shorted thru the metal cover.
GL
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
