Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

New finds at Sargent Auction
#3

That Wigit chassis and speaker are going to be tough to find, but you never know what might turn up.  To make your quest slightly easier that same cabinet was used for two different models:  the model 47 was the 4 tube Elf and the model 48 was the 5 tube Wigit:

http://www.crosleyradios.com/48c.html

As you can see the speakers are a reed type with no real frame so they are pretty fragile.  I haven't pulled the speaker in my Wigit yet, but the cone was damaged when a snake (a pet of the previous owner) crawled inside the cabinet  Icon_wtf

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"


Messages In This Thread
New finds at Sargent Auction - by Fred Taylor - 04-01-2018, 09:32 PM
RE: New finds at Sargent Auction - by jeffgniffke - 04-02-2018, 05:11 PM
RE: New finds at Sargent Auction - by Eliot Ness - 04-12-2018, 02:17 PM
RE: New finds at Sargent Auction - by Fred Taylor - 04-13-2018, 06:16 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>