noise on radio during the day **SOLVED**
Posts: 481
Threads: 18
Joined: Jan 2013
City: Mesa, AZ
Yes. Thermostats- Even electric stove thermostats- will sometimes interfere. Couldn't figure out some popping noises on the 38-1 when I first got it running. EVERY electrical device in the building seemed to affect it. (Even when the neighbors would open or shut their metal front outer door, I could hear a definite "pop" over the speaker) But the stove was obvious, as it's virtually in the same room as the radio, and I could hear the pops on the radio simultaneously as the audible "clicks" of the t'stat on the stove (and a/c 'stat, too) were heard. Thus, the looping and grounding of the antenna to the chassis. That stopped most all of the noise generated from everyones' electrical devices in the building. Glad you figured it out!
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
First Radio restoration
|
Hi Tubeman,
Welcome to the Philco Phorum. Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM |
First Radio restoration
|
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM |
Zenith H725
|
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately.
More ...EdHolland — 10:18 AM |
Graphics for majestic 1050 dial glass.
|
Murf;
I found this thread on the ARF, the first photo has a pretty good view of the dial glass.
Regards
ArranArran — 01:12 AM |
Zenith H725
|
hello Ed,
how about that speacial tape used for ducting it's like foil or how about thin piece of
aluminum roof flash...radiorich — 12:19 AM |
Zenith H725
|
Ed;
One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM |
Zenith H725
|
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM |
Zenith H725
|
The PSU filter cap arrived today (thank you USPS!) so I will work on that later.
Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM |
Philco 610B oscillator wiring
|
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM |
The list of my radio & TV collection!
|
Magical chords of forgotten melodies, old nostalgic music on an old radio... Saturday night blues on the Mid-Waves on an...RadioSvit — 12:20 PM |
Who's Online
|
There are currently 1352 online users. [Complete List] » 2 Member(s) | 1350 Guest(s)
|
|
|

|