06-30-2018, 10:55 AM
i think something i was asked to do just clicked.
I will jumper pins 7 & 8 of the 6sq7 *without" a tube installed.
i will then measure the voltage on pin 6 of the 6sq7 to see if my voltage is still degrading down to 11vdc.
I will jumper pins 7 & 8 of the 6sq7 *without" a tube installed.
i will then measure the voltage on pin 6 of the 6sq7 to see if my voltage is still degrading down to 11vdc.