Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Found in my attic. Help!!
#18

(10-03-2018, 01:56 PM)35Z5 Wrote:  
(10-03-2018, 12:16 PM)morzh Wrote:  As fa as I remember, even old Soviet TVs did not need service every several months, and those were used daily, usually in the evening hours, though of course back then we did not spend as much time in front of it as we d now: there was not much to watch. Still 2-3 hrs every day and more on weekends.

I suppose the 85+ TV repair shops listed in the local 1966 yellow pages was just filling space? Many of those had three or four locations. By comparison in the 2005 YP there were 12, phonebook at least twice as thick with probably ¾ size print.

 I said "Soviet TVs". We had 1 or maximum 2 radio repair shops in the city. Not that it was enough....guys like me were sometimes asked to fix a TV. Or a tape recorder.
But the 60-s TVs were very good, most common problem being drying electrolytic caps, scratchy controls and oxidized channel selector contacts.
Later when more modern TVs were introduced, especially the color type with semiconductor voltage multiplier which failed often....yes. But old TVs failed rarely. The flyback driver was a beam tetrode tube, no semiconductors......tubes lasted years. We owned two TVs, first we bought in 1965, worked fine though the channel selector knob broke within 1 year, the second we bought in 1972, also lasted all the way into 1979 when someone gifted us a color TV. No failures. BTW here I had an old Zenith color job, probably end of 70-s model, worked fine until I moved and did not take it with me.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.


Messages In This Thread
Found in my attic. Help!! - by 43ddoc - 10-02-2018, 11:01 AM
RE: Found in my attic. Help!! - by 35Z5 - 10-02-2018, 12:22 PM
RE: Found in my attic. Help!! - by klondike98 - 10-02-2018, 12:25 PM
RE: Found in my attic. Help!! - by klondike98 - 10-02-2018, 12:28 PM
RE: Found in my attic. Help!! - by 35Z5 - 10-02-2018, 12:55 PM
RE: Found in my attic. Help!! - by klondike98 - 10-02-2018, 01:01 PM
RE: Found in my attic. Help!! - by radio63 - 10-02-2018, 01:32 PM
RE: Found in my attic. Help!! - by 43ddoc - 10-02-2018, 02:47 PM
RE: Found in my attic. Help!! - by morzh - 10-02-2018, 03:46 PM
RE: Found in my attic. Help!! - by Jayce - 10-02-2018, 04:27 PM
RE: Found in my attic. Help!! - by Kestas - 10-02-2018, 08:15 PM
RE: Found in my attic. Help!! - by Chas - 10-03-2018, 09:10 AM
RE: Found in my attic. Help!! - by 35Z5 - 10-03-2018, 10:56 AM
RE: Found in my attic. Help!! - by morzh - 10-03-2018, 12:16 PM
RE: Found in my attic. Help!! - by Chas - 10-03-2018, 01:30 PM
RE: Found in my attic. Help!! - by 35Z5 - 10-03-2018, 01:56 PM
RE: Found in my attic. Help!! - by Chas - 10-03-2018, 02:18 PM
RE: Found in my attic. Help!! - by morzh - 10-03-2018, 02:43 PM
RE: Found in my attic. Help!! - by 35Z5 - 10-03-2018, 04:01 PM
RE: Found in my attic. Help!! - by Arran - 10-09-2018, 02:43 AM
RE: Found in my attic. Help!! - by 43ddoc - 08-16-2020, 02:31 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>