Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

New member with new (to me) 46-1226
#1
Photo 

Hi folks! 
I have long wanted one of this model. My grandparents had one, and it currently resides with my uncle. I realized that by the time I get that radio, I will perhaps not be interested in having it anymore, so when this one popped up on Craiglist for $75, I went for it. I also spent a couple days reading about restoration, replacing caps, the near impossibility of keeping the original cartridge working, so I was prepared. I was prepared to never plug the thing in until I had done a full cap job and cleaning. 

   

When I arrived at the house, I was horrified to see that the family had plugged it in ("We haven't tried it in 20 years, and wanted to make sure it worked still!") and was listening to the radio. I was thrilled that it worked, and quite worried that there would soon be a giant flame shooting out of the chassis. I paid them, they shut it off and unplugged it, and I took it home. 

Having seen it work, I did hook it up to a variac to see just what I was in for. It tunes AM very nicely, but no luck with SW. The turntable works beautifully, but the cartridge makes no sound, which is not a surprise. I plugged in my regular turntable, and the unit sounded quite nice. Controls are very staticky, only one light works, and the courtesy light switch for the turntable is really stuck. The insides are filthy with a very thick layer of dust, but this appears to have been kept indoors for its entire life, and hasn't suffered from excess humidity. 

I have now shut it off and will not be firing it up again until the caps are replaced. 

The top has some wear, but the finish looks fine. 

   

Turntable needs cleaning and probably lube as well, but it in great shape. 

   

Filthy with dust, its a code 122, so I know which schematics to look for. 

   

I'll soon be posting in the correct forums about the electronic restoration, as well as some cabinet tips, but I am simply thrilled to have this unit. I collect 78s as well, so I will have plenty of records to play on this unit. (Not valuable ones, but appropriate ones.) 

I'm excited!


Messages In This Thread
New member with new (to me) 46-1226 - by Mutantmoose - 12-08-2018, 11:21 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
12' Philco
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel. Kareem would have an e...morzh — 01:48 PM
12' Philco
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM
Hickok AC51 tube tester
I think they have only shown the secondaries of the transformer. Two of them feed the rectifiers' filaments.morzh — 12:58 PM
IF can wire size and Rubber mounts?
Arran If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM
12' Philco
Rod, Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently. H...morzh — 12:54 PM
Hickok AC51 tube tester
Absolutely no one is going to reverse engineer that circuit. Even the iron core is missing.RodB — 10:37 AM
IF can wire size and Rubber mounts?
Thanks to both members for your help regarding wire and tuner mtg supports. regards--Johngeorgetownjohn — 09:33 AM
Hickok AC51 tube tester
Note that no power cord, power switch, or power transformer switch are shown. That (along with my experience with full s...DaleHCook — 07:09 AM
IF can wire size and Rubber mounts?
A pair of wire strippers can give you an idea of what the existing gauge of the wire leads are in the IF can, I think it...Arran — 06:07 AM
My last cabinet for this year
Hello Dan, That is really beautiful what great looking radio you have ! I have friends who live in Calgary and the wea...radiorich — 01:51 AM

[-]
Who's Online
There are currently 5520 online users. [Complete List]
» 3 Member(s) | 5517 Guest(s)
AvatarAvatarAvatar

>