Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Magnavox 70s console
#1

Hi all, I don't know if this is the place for this but here goes. Working on a beautiful Magnavox 70s AM/FM 8 track record changer chassis #R321-12CA floor model for a friend. I know it's a dinosaur but it means a lot to him. Anyway, it's a SS unit with lousy AM. I don't know how well these units worked but it should be better than it is. With the volume all the way up, I can  barely here 2-3 stations. Did an alignment on it with hardly any improvement. The antenna trimmer has no effect. I have tested all the components in the RF amp section and even replaced the RF amp transistor. Everything leads me back to the antenna circuit which doesn't have much in it. According to the schematic the antenna primary should measure 4 ohms but only measures 2. I know 2 ohms isn't much but in this case it's half of what it should be. The tuning condenser shows no shorts between the plates. If I touch the base of the RF amp transistor it improves greatly. So I guess what I'm asking is anybody have any experience with this unit and how common would it be to have a defective ferrite loopstick antenna? I tried looking on line for a replacement but it is futile. I will be posting in the want adds for this antenna. Thanks!

Ron

Bendix 0626.      RCA 8BX5.   RCA T64
Philco 41-250.    Philco49-500
GE 201.             Philco 39-25
Motorola 61X13. Philco 46-42        Crosley 52TQ
Philco 37-116.    Philco 70
AK 35                Philco 46-350
Philco 620B.       Zenith Transoceanic B-600
Philco 60B.         Majestic 50
Philco 52-944.    AK 84


Messages In This Thread
Magnavox 70s console - by 462ron - 12-23-2018, 01:20 PM
RE: Magnavox 70s console - by Radioroslyn - 12-23-2018, 01:35 PM
RE: Magnavox 70s console - by 462ron - 12-23-2018, 02:16 PM
RE: Magnavox 70s console - by Radioroslyn - 12-23-2018, 02:46 PM
RE: Magnavox 70s console - by 462ron - 12-23-2018, 03:32 PM
RE: Magnavox 70s console - by 462ron - 12-23-2018, 03:43 PM
RE: Magnavox 70s console - by Arran - 12-23-2018, 04:43 PM
RE: Magnavox 70s console - by 462ron - 12-23-2018, 05:26 PM
RE: Magnavox 70s console - by 462ron - 12-30-2018, 11:41 AM
RE: Magnavox 70s console - by rocketeer - 01-08-2019, 11:56 PM
RE: Magnavox 70s console - by 462ron - 01-09-2019, 12:52 AM
RE: Magnavox 70s console - by rocketeer - 01-09-2019, 05:19 PM
RE: Magnavox 70s console - by 462ron - 01-09-2019, 08:42 PM
RE: Magnavox 70s console - by rocketeer - 01-09-2019, 09:15 PM
RE: Magnavox 70s console - by 462ron - 01-10-2019, 01:39 AM
RE: Magnavox 70s console - by 462ron - 01-22-2019, 03:36 PM
RE: Magnavox 70s console - by morzh - 01-23-2019, 12:24 PM
RE: Magnavox 70s console - by 462ron - 01-23-2019, 02:58 PM
RE: Magnavox 70s console - by morzh - 01-23-2019, 07:18 PM
RE: Magnavox 70s console - by 462ron - 01-24-2019, 01:28 AM
RE: Magnavox 70s console - by morzh - 01-24-2019, 09:12 AM
RE: Magnavox 70s console - by 462ron - 01-24-2019, 09:26 AM
RE: Magnavox 70s console - by 462ron - 01-24-2019, 01:49 PM
RE: Magnavox 70s console - by morzh - 01-24-2019, 02:19 PM
RE: Magnavox 70s console - by 462ron - 01-24-2019, 03:47 PM
RE: Magnavox 70s console - by morzh - 01-24-2019, 04:35 PM
RE: Magnavox 70s console - by 462ron - 01-25-2019, 03:11 PM
RE: Magnavox 70s console - by morzh - 01-25-2019, 05:45 PM
RE: Magnavox 70s console - by 462ron - 01-26-2019, 01:40 AM
RE: Magnavox 70s console - by morzh - 01-26-2019, 07:37 PM
RE: Magnavox 70s console - by 462ron - 01-26-2019, 09:13 PM
RE: Magnavox 70s console - by morzh - 01-27-2019, 12:58 PM
RE: Magnavox 70s console - by 462ron - 01-27-2019, 02:51 PM
RE: Magnavox 70s console - by morzh - 01-27-2019, 03:27 PM
RE: Magnavox 70s console - by Arran - 01-28-2019, 03:56 AM
RE: Magnavox 70s console - by 462ron - 01-28-2019, 02:21 PM
RE: Magnavox 70s console - by morzh - 01-28-2019, 02:24 PM
RE: Magnavox 70s console - by 462ron - 01-28-2019, 02:31 PM
RE: Magnavox 70s console - by morzh - 01-28-2019, 02:34 PM
RE: Magnavox 70s console - by 462ron - 01-30-2019, 10:44 PM
RE: Magnavox 70s console - by morzh - 01-30-2019, 11:27 PM
RE: Magnavox 70s console - by 462ron - 01-30-2019, 11:54 PM
RE: Magnavox 70s console - by morzh - 01-31-2019, 12:08 AM
RE: Magnavox 70s console - by 462ron - 01-31-2019, 12:16 AM
RE: Magnavox 70s console - by Ron Ramirez - 01-31-2019, 07:57 AM
RE: Magnavox 70s console - by morzh - 01-31-2019, 10:12 AM
RE: Magnavox 70s console - by 462ron - 01-31-2019, 11:02 AM
RE: Magnavox 70s console - by morzh - 01-31-2019, 12:05 PM
RE: Magnavox 70s console - by 462ron - 02-01-2019, 12:19 AM
RE: Magnavox 70s console - by morzh - 02-01-2019, 11:02 AM
RE: Magnavox 70s console - by 462ron - 02-01-2019, 05:35 PM



Users browsing this thread: 5 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Any 6.3 volt pilot light will work. I would use the brightest one I could find in my workroom. Be sure the dial is clean...RodB — 10:45 AM
HiFi (Chifi) tube amp build - but my own design.
Tim, nice write up and thanks for sharing !! Sincerely Richardradiorich — 02:47 AM
HiFi (Chifi) tube amp build - but my own design.
Well, this was a real "Hum-Dinger" :lol: ! This will be kinda long, but hopefully it will help others having t...TV MAN — 01:55 AM
Shadow Meter Bulb
Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM
Philco 41-608 changer coupler
3D-printing...short of machining, of course. Or molding.morzh — 05:20 PM
Philco 41-608 changer coupler
Thanks, Morzh. That solves the issue of the rubber pieces. Now, I need to find a way to replicate the pot metal piec...alangard — 05:07 PM
12' Philco
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel. Kareem would have an e...morzh — 01:48 PM
12' Philco
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM
Hickok AC51 tube tester
I think they have only shown the secondaries of the transformer. Two of them feed the rectifiers' filaments.morzh — 12:58 PM
IF can wire size and Rubber mounts?
Arran If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM

[-]
Who's Online
There are currently 7768 online users. [Complete List]
» 2 Member(s) | 7766 Guest(s)
AvatarAvatar

>