Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Magnavox 70s console
#16

Hi all, well trying to wrap up this radio from H**l. The last problem I am having is in the FM section. I can't get anything but my local station, which is coming in on several positions on the dial. Seems like the oscillator isn't running as tuning has no effect. I've tried listening for it with a portable but nothing. The portable picks up the oscillator from other FM receivers I have. As you can see, the oscillator circuit isn't very complicated. Not many components at all. Original measurements showed voltages way off on Q1, the FM osc. The original transistor had collector to emitter leakage. I've replaced it and now the voltages are more in line but still no difference. I have replaced R1, 2, 4. I have replaced or subbed C7, 9, 10, 11 and 17 even though they test good. I have tested C15 and the tuning gang. I have disconnected VC1 the afc diode then reconnected later. L3 is the only inductor in the circuit which is only a few turns of coiled wire. The spacing of the turns is loose so that I can see there's nothing shorted and it does ohm out. Q1 cross references to an ECG 161 as per parts list notes which I installed. I am totally stumped on this  one. I keep coming back to the osc transistor and have subbed 3 other NPN silicon FM RF or oscillator capable transistors in addition to the ECG 161, but still no difference. Even subbed a UHF type! Perplexed isn't the word. Sorry for the long dissertation.

Ron


Attached Files Image(s)
   

Bendix 0626.      RCA 8BX5.   RCA T64
Philco 41-250.    Philco49-500
GE 201.             Philco 39-25
Motorola 61X13. Philco 46-42        Crosley 52TQ
Philco 37-116.    Philco 70
AK 35                Philco 46-350
Philco 620B.       Zenith Transoceanic B-600
Philco 60B.         Majestic 50
Philco 52-944.    AK 84


Messages In This Thread
Magnavox 70s console - by 462ron - 12-23-2018, 01:20 PM
RE: Magnavox 70s console - by Radioroslyn - 12-23-2018, 01:35 PM
RE: Magnavox 70s console - by 462ron - 12-23-2018, 02:16 PM
RE: Magnavox 70s console - by Radioroslyn - 12-23-2018, 02:46 PM
RE: Magnavox 70s console - by 462ron - 12-23-2018, 03:32 PM
RE: Magnavox 70s console - by 462ron - 12-23-2018, 03:43 PM
RE: Magnavox 70s console - by Arran - 12-23-2018, 04:43 PM
RE: Magnavox 70s console - by 462ron - 12-23-2018, 05:26 PM
RE: Magnavox 70s console - by 462ron - 12-30-2018, 11:41 AM
RE: Magnavox 70s console - by rocketeer - 01-08-2019, 11:56 PM
RE: Magnavox 70s console - by 462ron - 01-09-2019, 12:52 AM
RE: Magnavox 70s console - by rocketeer - 01-09-2019, 05:19 PM
RE: Magnavox 70s console - by 462ron - 01-09-2019, 08:42 PM
RE: Magnavox 70s console - by rocketeer - 01-09-2019, 09:15 PM
RE: Magnavox 70s console - by 462ron - 01-10-2019, 01:39 AM
RE: Magnavox 70s console - by 462ron - 01-22-2019, 03:36 PM
RE: Magnavox 70s console - by morzh - 01-23-2019, 12:24 PM
RE: Magnavox 70s console - by 462ron - 01-23-2019, 02:58 PM
RE: Magnavox 70s console - by morzh - 01-23-2019, 07:18 PM
RE: Magnavox 70s console - by 462ron - 01-24-2019, 01:28 AM
RE: Magnavox 70s console - by morzh - 01-24-2019, 09:12 AM
RE: Magnavox 70s console - by 462ron - 01-24-2019, 09:26 AM
RE: Magnavox 70s console - by 462ron - 01-24-2019, 01:49 PM
RE: Magnavox 70s console - by morzh - 01-24-2019, 02:19 PM
RE: Magnavox 70s console - by 462ron - 01-24-2019, 03:47 PM
RE: Magnavox 70s console - by morzh - 01-24-2019, 04:35 PM
RE: Magnavox 70s console - by 462ron - 01-25-2019, 03:11 PM
RE: Magnavox 70s console - by morzh - 01-25-2019, 05:45 PM
RE: Magnavox 70s console - by 462ron - 01-26-2019, 01:40 AM
RE: Magnavox 70s console - by morzh - 01-26-2019, 07:37 PM
RE: Magnavox 70s console - by 462ron - 01-26-2019, 09:13 PM
RE: Magnavox 70s console - by morzh - 01-27-2019, 12:58 PM
RE: Magnavox 70s console - by 462ron - 01-27-2019, 02:51 PM
RE: Magnavox 70s console - by morzh - 01-27-2019, 03:27 PM
RE: Magnavox 70s console - by Arran - 01-28-2019, 03:56 AM
RE: Magnavox 70s console - by 462ron - 01-28-2019, 02:21 PM
RE: Magnavox 70s console - by morzh - 01-28-2019, 02:24 PM
RE: Magnavox 70s console - by 462ron - 01-28-2019, 02:31 PM
RE: Magnavox 70s console - by morzh - 01-28-2019, 02:34 PM
RE: Magnavox 70s console - by 462ron - 01-30-2019, 10:44 PM
RE: Magnavox 70s console - by morzh - 01-30-2019, 11:27 PM
RE: Magnavox 70s console - by 462ron - 01-30-2019, 11:54 PM
RE: Magnavox 70s console - by morzh - 01-31-2019, 12:08 AM
RE: Magnavox 70s console - by 462ron - 01-31-2019, 12:16 AM
RE: Magnavox 70s console - by Ron Ramirez - 01-31-2019, 07:57 AM
RE: Magnavox 70s console - by morzh - 01-31-2019, 10:12 AM
RE: Magnavox 70s console - by 462ron - 01-31-2019, 11:02 AM
RE: Magnavox 70s console - by morzh - 01-31-2019, 12:05 PM
RE: Magnavox 70s console - by 462ron - 02-01-2019, 12:19 AM
RE: Magnavox 70s console - by morzh - 02-01-2019, 11:02 AM
RE: Magnavox 70s console - by 462ron - 02-01-2019, 05:35 PM



Users browsing this thread: 9 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Not sure if anyone has tried this but there are 6.3 volt miniature lamps in bayonet and screw-in base options available ...GarySP — 11:31 AM
Shadow Meter Bulb
Any 6.3 volt pilot light will work. I would use the brightest one I could find in my workroom. Be sure the dial is clean...RodB — 10:45 AM
HiFi (Chifi) tube amp build - but my own design.
Tim, nice write up and thanks for sharing !! Sincerely Richardradiorich — 02:47 AM
HiFi (Chifi) tube amp build - but my own design.
Well, this was a real "Hum-Dinger" :lol: ! This will be kinda long, but hopefully it will help others having t...TV MAN — 01:55 AM
Shadow Meter Bulb
Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM
Philco 41-608 changer coupler
3D-printing...short of machining, of course. Or molding.morzh — 05:20 PM
Philco 41-608 changer coupler
Thanks, Morzh. That solves the issue of the rubber pieces. Now, I need to find a way to replicate the pot metal piec...alangard — 05:07 PM
12' Philco
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel. Kareem would have an e...morzh — 01:48 PM
12' Philco
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM
Hickok AC51 tube tester
I think they have only shown the secondaries of the transformer. Two of them feed the rectifiers' filaments.morzh — 12:58 PM

[-]
Who's Online
There are currently 7989 online users. [Complete List]
» 1 Member(s) | 7988 Guest(s)
Avatar

>