Low voltage and oscillation

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Low voltage and oscillation

madsowry
Member

Posts: 124
Threads: 17
Joined: Jan 2018
City: Kingsville Ohio

03-12-2019, 05:26 PM

Thanks Chas for all the help
Still have the low voltage and the more I mess with this thing the worse it gets. One thing I saw in the production changes is they changed the 2nd IF (37) to a different part number(32-3383), mine still has the first pt. no. (32-3246) in it. I don't think that would cause what I'm experiencing with this radio now. I would think it would at least oscillate even with the wrong IF can. By the way both IF cans have good resistance on their windings but the 2nd IF has those 100uuf caps built in the porcelain. Just in case here's the sch.
http://www.nostalgiaair.org/pagesbymodel...013339.pdf
No oscillation at all right now.

Thanks again

Dick

Find

« Next Oldest | Next Newest »

Messages In This Thread

Low voltage and oscillation - by madsowry - 03-11-2019, 07:01 PM

RE: Low voltage and oscillation - by morzh - 03-11-2019, 08:52 PM

RE: Low voltage and oscillation - by madsowry - 03-11-2019, 10:42 PM

RE: Low voltage and oscillation - by Chas - 03-12-2019, 11:58 AM

RE: Low voltage and oscillation - by madsowry - 03-12-2019, 05:26 PM

RE: Low voltage and oscillation - by Chas - 03-12-2019, 06:08 PM

RE: Low voltage and oscillation - by madsowry - 03-12-2019, 11:14 PM

View a Printable Version

Users browsing this thread: 2 Guest(s)

Recent Posts
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit. That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM
Shadow Meter Bulb
Ross I am not sure what current limiting effect the incandescent provides. They are two different parts of the sch...morzh — 08:31 PM

Who's Online

There are currently 5905 online users. [Complete List]
» 1 Member(s) | 5904 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me