Posts: 1,369
Threads: 45
Joined: Nov 2017
City: Menlo Park
State, Province, Country: CA
If it is like mine, with three round IF cans, you must loosen and remove the screws on top of the cans - these actually hold the ceramic bodies of the trimmers. Nothing will fall inside. You also have to remove the screws holding the cans to the base. All three cans will come off together, exposing the coils and the trimmer bodies. It should all go back together the same way. Be extremely careful when this is opened up.
I can look at one of the trimmers, if you want, as I have a set of these bought as part of a junk set someone was parting out... That will let me investigate what cleaning of the trimmer would be possible.
I don't hold with furniture that talks.
Messages In This Thread
RE: Stall's 16b cathedral - by EdHolland - 03-28-2019, 08:13 PM
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
My Philco 37-116 Restore
|
| Are you measuring relative to the centertap or the GND?morzh — 11:57 PM |
|
Philco 610B oscillator wiring
|
| Still not clear on the wiring interface between the 6A7 and oscillator. After refering to the available schematics and s...Tubester — 07:18 PM |
|
Refinishing Ideas
|
| My 37-116 code 121 is the best sounding radio i have...a daily driver. Since we are talking about "changes". ...poulsbobill — 07:18 PM |
|
My Philco 37-116 Restore
|
| Hello, I finally got brave enough to take the cans off the Expander Unit. Got the grid cap wires replaced and back toget...dconant — 06:50 PM |
|
Zenith H725
|
| I got into the first AM IF can today, and found its mica was cracked. Amazing that it was still working. This one makes ...EdHolland — 06:10 PM |
|
Philco model #20
|
| AHH HA , I got it and can’t thank you fellows enough , when I changed the capacitors I took the advice and did not unsol...onlyrick — 02:24 PM |
|
Zenith H725
|
| Hello Ed,
yes, I like letting projects run for few days to make sure they don't start acting up .
Sincerely Richardradiorich — 01:03 PM |
|
Philco 46-480 Electronic Restoration
|
| I am almost finished with this restoration. All which remains is the power transformer. I cleaned it up some time ago, b...jrblasde — 12:41 PM |
|
Philco model #20
|
| I seem to recall in some TRF sets there being a Local/Distance toggle switch that removes the B+ from the first 24 rf tu...RodB — 09:46 AM |
|
Refinishing Ideas
|
| Hi Doppelganger,
After rereading your thread, did you mount the Zenith speakers in the two bottom left and right pos...MrFixr55 — 09:39 AM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
