02-15-2006, 09:59 AM
Check for continuity in both windings of transformer #2;
Both sections of coil #5;
All three sections of coil #9 and #10.
Check for B+ on plates of both RF tubes. If missing on either plate, it's a coil winding associated with that tube.
(I assume you already replaces all the wax-paper caps and any out of tolerance resistors.)
Both sections of coil #5;
All three sections of coil #9 and #10.
Check for B+ on plates of both RF tubes. If missing on either plate, it's a coil winding associated with that tube.
(I assume you already replaces all the wax-paper caps and any out of tolerance resistors.)
Chuck Schwark,
The Philco Repair Bench
[Image: http://www.philcorepairbench.com/images/philog3tiny.gif]
http://www.philcorepairbench.com