Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 118 High Boy
#1

Recently got a Philco 118 highboy, excellent cabinet, trashed speaker, questionable chassis. Had a GREAT playing 118 chassis and an extra H13 speaker. Did have to use shadowmeter from highboy chassis. Maybe it's me but I have never have had an easy time adjusting a shadowmeter for centering of the filiment in the meter aperture and distance of the filiment from the meter aperture.

HOWEVER it is togther and plays and recieves great. The 118 is often overlooked, as it is "only" a two band radio. But it is an 8 tube radio with a 42 driver and 2 42's (triode push pull) that are the same as found in the larger 16 and 116 sets.

Now if I can: (1) get that d__d Philco 144 working; (2) start work on the Philco 43 that I am intrigued by; (3) Just say the H**l with it and go smoke a cigarette, which is weird because I don't smoke cigarettes.


Messages In This Thread
Philco 118 High Boy - by TA Forbes - 12-06-2010, 05:43 PM
Re: Philco 118 High Boy - by Steve Davis - 12-06-2010, 08:17 PM
Re: Philco 118 High Boy - by Ron Ramirez - 12-07-2010, 07:55 AM
Re: Philco 118 High Boy - by TA Forbes - 12-07-2010, 01:38 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 3620 online users. [Complete List]
» 2 Member(s) | 3618 Guest(s)
AvatarAvatar

>