Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

47-1227 - Radio will not tune in any stations.
#18

Hi again,   question?   Capacitor 310.   Has 3 wires coming out of it.  2 wires at  one end and 1 wire at the other end.   1 of these wires goes to ground.  How are the other 2 wires connected inside the capacitor?  What's inside this capacitor?
Is this 2 different capacitors inside?


Messages In This Thread
RE: 47-1227 - Radio will not tune in any stations. - by Lucky - 06-10-2019, 06:40 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 89B code 123 newbie
Hi all and thanks for the great responses!  I went with a can left over from another radio, kinda scratched up but it do...Kurt P — 04:35 PM
Clear Schematic for 41-255
AH Just noticed 1 error on my cleaned-up schematic... Part # 27 - the 8uf electrolytic cap...The lead that is marked RE...patrician56 — 04:10 PM
Clear Schematic for 41-255
Hi Ross, I don't know if you still need a clear schematic for the 41-255 but here is one that I cleaned up. I added pin...patrician56 — 03:45 PM
AC/DC Transformer-less Sets
Joseph,   Thanks for the follow up. MrFixr55,   Thanks for the info. I was aware of the "Current Wars"...PeterN — 03:32 PM
AC/DC Transformer-less Sets
Fantastic report, Mr. Fixr! I had never read about AC/DC sets originally running at a higher price than AC-only models, ...jrblasde — 01:21 PM
49-504
Also wheni first power on the 7a8 gets very bright more than normal not sure what I did wrongphilco4me — 12:53 PM
49-504
Hello all I am doing a 49-504 and in section 4 I see C401is that a 5mmf ? I did not see that when I replaced the caps. ...philco4me — 12:47 PM
Looking for place to donate unique Philco Philco J-1930 Prototype
Thx for the description. I thought that it had to have a single 10 - 12" Sensor. Congrats on restoring the GE and...MrFixr55 — 10:12 AM
AC/DC Transformer-less Sets
Some of the original Edison DC generators were in use until the 1940s. The NYC subway and electrified Long Island Rail ...MrFixr55 — 09:39 AM
Samlex heavy-Duty bench supply filter question
I suggest sticking with the original values. Depending upon the design if you increase the cap values too much the incre...DaleHCook — 08:55 AM

[-]
Who's Online
There are currently 2585 online users. [Complete List]
» 3 Member(s) | 2582 Guest(s)
AvatarAvatarAvatar

>