06-15-2019, 05:46 PM
The short answer is no. You might have a look here: https://philcoradio.com/library/index.ph...adio_Clubs and see if there are any local clubs maybe someone could give you a hand.
To do the good job it's rather time consuming and laborious. Supplies to start can be a little pricey but you would end up w/enough to do several cabinets. As for the veneer most of us have scrap cabinets w/some damages that aren't worth fixing. These end up being good donors for veneer especially for small pieces.
To do the good job it's rather time consuming and laborious. Supplies to start can be a little pricey but you would end up w/enough to do several cabinets. As for the veneer most of us have scrap cabinets w/some damages that aren't worth fixing. These end up being good donors for veneer especially for small pieces.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
