EH Scott Philharmonic AM/FM
Posts: 1,190
Threads: 50
Joined: Oct 2017
City: Allendale, MI
Thanks Russ. This is the way I did the 16. It certainly helps to keep things straight. I won't play with the chrome process, but I am seriously contemplating playing with nickle and tin plating. I've done some cadmium plating on airplane parts using the the brush plating method. One can't get the solutions for the dangerous cadmium anymore. There are some small parts that I would like to improve the appearance of using nickel or tin (tube shields on most radios look awful! I suspect they were tin plated. Correct me please, if I am wrong.) When this is all finished, I think I'll be proud of it. A lot of work, though.
(This post was last modified: 08-17-2019, 02:56 AM by rfeenstra.)
Messages In This Thread
RE: EH Scott Philharmonic AM/FM - by rfeenstra - 08-17-2019, 02:53 AM
Users browsing this thread: 12 Guest(s)
|
Recent Posts
|
trying to identify this wire type
|
The red wire is rubber covered wire.
The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM |
trying to identify this wire type
|
Greetings Phorum members,
Hope you can help me identify this type of wire in the photo I have attached. I am not sure ...georgetownjohn — 01:53 PM |
Philco 60 Squealing
|
All correct shields must be in place, all tubes correct no subs of any kind.
Check any soldered, riveted ground conne...Chas — 01:24 PM |
Philco 60 Squealing
|
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM |
Philco 46-420 Code 121 Reception issues
|
Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
Philco 46-420 Code 121 Reception issues
|
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
Philco 42-1008 conversion kit
|
Interesting. I haven't seen that before.klondike98 — 07:02 PM |
12' Philco
|
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
Shadow Meter Bulb
|
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
Shadow Meter Bulb
|
Ok. Thanks for the correction.RossH — 03:09 PM |
Who's Online
|
There are currently 5927 online users. [Complete List] » 1 Member(s) | 5926 Guest(s)
|
|
|
|