Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Ron's RCA Victor T8-14
#44

Epilog

I aligned the T8-14 late this afternoon using my "new" (to me) B+K - Precision 4040 function generator. In all, it took about 45 minutes. I went over the AM band multiple times since the low end was so far off. And then on band C, I had some trouble finding the fundamental at 18 mc but I finally did so after some tweaking and aligned it properly at 18 mc per the instructions.

I already knew the AM band's alignment was WAY off on the low end of the band. Alignment benefited the IF chain as well as all three bands.

I spent some time listening on all three bands, then stopped for dinner. Afterwards, I put the chassis back in its cabinet and shot the following video. You will notice now that not only are stations coming in close if not right on where they should be, but the low end of the AM band is now just as loud as the high end. And that is how it should be.

[Video: https://youtu.be/0zTt0uEKpvg]

And...that is it for this RCA Victor T8-14. The chassis is complete, aligned, and plays very well on all three bands.

--
Ron Ramirez
Ferdinand IN


Messages In This Thread
Ron's RCA Victor T8-14 - by Ron Ramirez - 09-28-2019, 01:34 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 09-28-2019, 01:49 PM
RE: Ron's RCA Victor T8-14 - by rfeenstra - 09-28-2019, 02:28 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 09-28-2019, 09:32 PM
RE: Ron's RCA Victor T8-14 - by mikethedruid - 09-28-2019, 11:16 PM
RE: Ron's RCA Victor T8-14 - by rfeenstra - 09-28-2019, 11:30 PM
RE: Ron's RCA Victor T8-14 - by OldRestorer - 09-29-2019, 09:16 AM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 09-29-2019, 01:36 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 09-29-2019, 01:42 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 09-29-2019, 01:44 PM
RE: Ron's RCA Victor T8-14 - by mikethedruid - 09-30-2019, 02:14 AM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 09-30-2019, 08:57 AM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 09-30-2019, 09:32 PM
RE: Ron's RCA Victor T8-14 - by Jake Blake - 09-30-2019, 09:48 PM
RE: Ron's RCA Victor T8-14 - by mikethedruid - 09-30-2019, 10:33 PM
RE: Ron's RCA Victor T8-14 - by Ed Locker - 10-01-2019, 10:07 AM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-01-2019, 10:31 AM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-11-2019, 10:43 PM
RE: Ron's RCA Victor T8-14 - by mikethedruid - 10-12-2019, 12:24 AM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-13-2019, 09:40 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-14-2019, 08:11 PM
RE: Ron's RCA Victor T8-14 - by morzh - 10-15-2019, 09:48 AM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-15-2019, 12:04 PM
RE: Ron's RCA Victor T8-14 - by Phlogiston - 10-15-2019, 01:39 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-17-2019, 09:14 AM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-27-2019, 09:31 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-27-2019, 09:41 PM
RE: Ron's RCA Victor T8-14 - by mikethedruid - 10-28-2019, 12:00 AM
RE: Ron's RCA Victor T8-14 - by Phlogiston - 10-28-2019, 11:08 AM
RE: Ron's RCA Victor T8-14 - by Eliot Ness - 10-28-2019, 11:41 AM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-28-2019, 12:04 PM
RE: Ron's RCA Victor T8-14 - by Phlogiston - 10-28-2019, 12:59 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-28-2019, 02:33 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-28-2019, 09:36 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-29-2019, 10:28 PM
RE: Ron's RCA Victor T8-14 - by Ed Locker - 10-30-2019, 09:41 AM
RE: Ron's RCA Victor T8-14 - by Ed Locker - 10-30-2019, 10:20 AM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-30-2019, 11:22 AM
RE: Ron's RCA Victor T8-14 - by Phlogiston - 10-30-2019, 11:42 AM
RE: Ron's RCA Victor T8-14 - by Jake Blake - 10-30-2019, 04:36 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-30-2019, 07:42 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 10-31-2019, 09:37 PM
RE: Ron's RCA Victor T8-14 - by mikethedruid - 10-31-2019, 10:22 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 11-01-2019, 08:14 PM
RE: Ron's RCA Victor T8-14 - by Ron Ramirez - 11-03-2019, 10:27 PM



Users browsing this thread: 4 Guest(s)
[-]
Recent Posts
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM
The list of my radio & TV collection!
Magical chords of forgotten melodies, old nostalgic music on an old radio... Saturday night blues on the Mid-Waves on an...RadioSvit — 12:20 PM
Philco 42-345 Restoration/Repair
Thank you MrFixr55 the issue with this radio is that the internal coil antenna is missing and there was a wire in its pl...osanders0311 — 11:34 AM
Philco 610B oscillator wiring
Regarding the oscillator circuit which is comprised of the 6A7's cathode, control grid, and screen grid. These elements ...Radioroslyn — 10:33 AM
Philco 42-345 Restoration/Repair
Hi OSanders, First off, welcome to the Philco Phorum where Phine Phamily-Phriendly Pholks Phull of Philco Phacts and P...MrFixr55 — 08:41 AM
Philco 42-345 Restoration/Repair
Today I've been reading through the site trying to learn more about this radio. I also soldered the lose power cord cabl...osanders0311 — 08:24 PM
Philco 610B oscillator wiring
Thanks David! I do have that same later prodution model 610 schematic. I've also studied the Philco service bulletins fo...Tubester — 08:12 PM
Philco 610B oscillator wiring
Some info from Beitmans says late production. David   David — 06:06 PM
Restoring Philco 96
Oh wow! Just found this thread.  Brings me back to early days on this phorum.  I did a 96 back in 2017.  Thread here: ...rfeenstra — 06:05 PM

[-]
Who's Online
There are currently 2426 online users. [Complete List]
» 1 Member(s) | 2425 Guest(s)
Avatar

>