11-14-2019, 08:27 PM
Very good, Mike..and very impressive.
All:
Four tube shields arrived today from a friend in Lexington. They are now installed on the chassis.
I also took the time to remove the two rivets holding the Candohm in place. Most of the wires are still attached to it. It has so many terminals that I intentionally left it this way to (hopefully) make it easier to know which wire goes where on the new assembly and to reduce the possibility of errors in wiring up the new assembly.
Tomorrow afternoon...hopefully...the installation of new resistors to replace the Candohm begins.
All:
Four tube shields arrived today from a friend in Lexington. They are now installed on the chassis.
I also took the time to remove the two rivets holding the Candohm in place. Most of the wires are still attached to it. It has so many terminals that I intentionally left it this way to (hopefully) make it easier to know which wire goes where on the new assembly and to reduce the possibility of errors in wiring up the new assembly.
Tomorrow afternoon...hopefully...the installation of new resistors to replace the Candohm begins.
--
Ron Ramirez
Ferdinand IN