01-01-2020, 09:02 PM
Well, this Lazarus is coming along slowly. The IF transformer re-wind working is nothing less than a miracle, and the radio plays quite well , considering half the power transformer HV secondary winding is open.
I got the dial light working by re-wiring and also soldering the socket directly to the bracket it normally clips onto, ( that part of the socket was broken off), as well as using the great info in the library for that.
Received new dial string yesterday , so I attempted to re-string that, but not quite getting something right.
If I turn the tuning condenser all the way to the low end, it won't turn back . The cord just slips on the turning shaft. I'm wondering which direction the small spring on the pulley is supposed to extend to. I had it extending to the right ( as you look at the pulley from the front). But maybe it's supposed to extend to the left. Does anyone have any insight on this?
I got the dial light working by re-wiring and also soldering the socket directly to the bracket it normally clips onto, ( that part of the socket was broken off), as well as using the great info in the library for that.
Received new dial string yesterday , so I attempted to re-string that, but not quite getting something right.
If I turn the tuning condenser all the way to the low end, it won't turn back . The cord just slips on the turning shaft. I'm wondering which direction the small spring on the pulley is supposed to extend to. I had it extending to the right ( as you look at the pulley from the front). But maybe it's supposed to extend to the left. Does anyone have any insight on this?
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
