Did they make?

Register

Guest Join Us

Hello Guest,

Please feel free to join us!
There are many more parts of the Phorum that only members can see.

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Did they make?

rjm
Member

Posts: 70
Threads: 17
Joined: Jan 2006
City: Newbern State, Province, Country: Tennessee

#6

03-02-2006, 07:25 PM

Under the bezel on the lower corners are two holes about the size of the hole for the on/off switch. Next to the outside of the volume and other control are two punch-outs for holes the same size. The chassis when removed was all-original. The condition of the radio and the layers of dust and dirt suggest it had been stored for a long while. I guess surprises like this are what make this hobby even better. Also did philco make seperate enclosed speakers for these sets? Meaning 4 wires not 2. Thanks, Richard

Find

« Next Oldest | Next Newest »

Messages In This Thread

Did they make? - by rjm - 03-02-2006, 05:58 AM

[No subject] - by Chuck Schwark - 03-02-2006, 09:48 AM

[No subject] - by rjm - 03-02-2006, 03:22 PM

[No subject] - by Chuck Schwark - 03-02-2006, 05:17 PM

[No subject] - by Robbie Roberts - 03-02-2006, 05:22 PM

[No subject] - by rjm - 03-02-2006, 07:25 PM

[No subject] - by Chuck Schwark - 03-02-2006, 10:09 PM

[No subject] - by rjm - 03-05-2006, 09:26 PM

[No subject] - by rjm - 03-05-2006, 11:03 PM

[No subject] - by rjm - 09-24-2006, 02:01 AM

[No subject] - by Ron Ramirez - 09-24-2006, 09:43 AM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM

Who's Online

There are currently 2922 online users. [Complete List]
» 3 Member(s) | 2919 Guest(s)