[Patrick]

Philco 650B and 655B schematics. Look at the two layouts below. It shows that the 650B has the rectifier tube behind a can cap, and the 655B shows the 80 at the edge of the chassis. But if you look at Ron's 650 (and others), it shows the 80 on the 650 at the edge.

The other difference I have noticed without going through the radio, is the #66 wirewound on the 650 is suppose to be 10-110-130. But on mine, it is 4 sections #57 10-10-110-130.

So in all the documentation, are the model numbers switched? I'm puzzled.

[Image: https://i.imgur.com/pM95tY2.jpg]

[Image: https://i.imgur.com/fDLO6FS.jpg]