08-26-2020, 07:33 PM
Hi Terry,
thank you so much I thought it was only a wire.......many things to learn. It is 174 ohms instead of 165 is it ok for a first testing or I need to change it?
Following the schematic that is really with a low quality (Nostalgia org or Philco year 1948 book have same quality) I also found something that is not clear to me in the section 1.
The C102 20uF +B , the resistor R101 and the speaker field are connected on the radio to pin 2 of the rectifier 5AZ4, but in the schematic they go to pin 8. The two blue wires from T100 go to pin 2 and pin 8. What is correct the schematic or the cabling I have on the radio?
When I will understand and identified all the components and the connection on the schematic I will start the recap and testing of the voltages
Thank you so much for your support
Camillo
thank you so much I thought it was only a wire.......many things to learn. It is 174 ohms instead of 165 is it ok for a first testing or I need to change it?
Following the schematic that is really with a low quality (Nostalgia org or Philco year 1948 book have same quality) I also found something that is not clear to me in the section 1.
The C102 20uF +B , the resistor R101 and the speaker field are connected on the radio to pin 2 of the rectifier 5AZ4, but in the schematic they go to pin 8. The two blue wires from T100 go to pin 2 and pin 8. What is correct the schematic or the cabling I have on the radio?
When I will understand and identified all the components and the connection on the schematic I will start the recap and testing of the voltages
Thank you so much for your support
Camillo
