[ascion90]

Hi,

Sorry I was  wrong in the previously post .The bottom one in the pictures I attached before. On the schematic it is open the lower one ( 10 Ohms) with the red wire and the mica capacitor in parallel. The first one in the schematic has a lower resistance 3 ohms instead of 13 ( the one with the blue wire).

Another wrong point I wrote is the voltage on pin 2 of the 7R7 is ok with 240V . I don't have voltage on the other end of the red wire on the pin 6 of the 6K6GT

Thanks

Camillo