Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1937 Coronado Model 650 Farm Radio
#10

I was also thinking of those Sealed Lead-Acid Rechargable batteries like the onces they use in those UPS Backup supplies, I have tons of resistors ranging from 1/8 watt to 10 watt jobs and I figure I might be able to do something like that for the "A" Battery, either that or get some Lithium-Ion Rechargable "D" Cells (which do exist), and use those.

EDIT: I found these rechargeable batteries at Harbor Freight for $8 and they are supposed to be High Capacity batteries that are good for high drain applications such as electronics devices, and they can be recharged up to a 1,000 times, there's also a decent looking option at Batteries + Bulbs for $33. See links below.

Rechargeable Batteries

Rechargeable Batteries 2


Messages In This Thread
RE: 1930s Coronado Farm Radio - by Eliot Ness - 11-25-2020, 04:43 PM
RE: 1930s Coronado Farm Radio - by Eliot Ness - 11-25-2020, 05:03 PM
RE: 1930s Coronado Farm Radio - by David - 11-25-2020, 05:56 PM
RE: 1930s Coronado Farm Radio - by Arran - 11-25-2020, 09:36 PM
RE: 1937 Coronado Model 650 Farm Radio - by Arran - 11-25-2020, 10:48 PM
RE: 1937 Coronado Model 650 Farm Radio - by captainclock1988 - 11-25-2020, 11:31 PM
RE: 1937 Coronado Model 650 Farm Radio - by David - 11-26-2020, 09:00 AM
RE: 1937 Coronado Model 650 Farm Radio - by David - 11-26-2020, 12:02 PM
RE: 1937 Coronado Model 650 Farm Radio - by David - 11-26-2020, 02:56 PM
RE: 1937 Coronado Model 650 Farm Radio - by Arran - 11-27-2020, 02:03 AM
RE: 1937 Coronado Model 650 Farm Radio - by Arran - 11-28-2020, 03:30 AM
RE: 1937 Coronado Model 650 Farm Radio - by RodB - 01-01-2021, 09:16 AM
RE: 1937 Coronado Model 650 Farm Radio - by David - 01-08-2021, 08:11 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM

[-]
Who's Online
There are currently 2974 online users. [Complete List]
» 3 Member(s) | 2971 Guest(s)
AvatarAvatarAvatar

>