11-27-2020, 09:34 PM
So to answer the pending question let's pull up the diagram. https://philcoradio.com/library/download...l.%201.pdf What we have is # 56 the - side goes to the ct of the high voltage winding and 57&58. + side of 56 goes to pin 1 or 4 of the #80 tube. Next #54 - side goes the chassis ground and + side goes to pin 3 of the # 42 tube and some other stuff that all connected to pin 3. Finally #41 goes to the junction of #'s 40&42. - side goes to chassis ground. Would use a pair of 10mf @450v for the 8's and a 22mf @ 450v for the 16.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
