Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 41-280 NO Sound
#11

(1) Is the hum a constant level regardless of volume control setting... or does it vary with the VC setting?
Constant...

(2) Is the hum very loud or is it just a "background" type noise?
Not real load but annoying

(3) Is the hum a 60Hz tone or a 120 Hz tone?

Seems like 60hz..

Does hum go away with volume turned all the way down? NO Constant hum hum doesn't get loader with volume

Do both #41 tubes have B+ voltage an pin #2? YES 183 volts, 181 volts
Does pin #3 of each #41 tube have voltage? YES 185 volts, 171 volts

Skip


Messages In This Thread
Philco 41-280 NO Sound - by vecher - 04-17-2021, 01:49 PM
RE: Philco 41-280 NO Sound - by morzh - 04-17-2021, 03:18 PM
RE: Philco 41-280 NO Sound - by vecher - 04-17-2021, 05:31 PM
RE: Philco 41-280 NO Sound - by morzh - 04-17-2021, 07:39 PM
RE: Philco 41-280 NO Sound - by vecher - 04-17-2021, 11:10 PM
RE: Philco 41-280 NO Sound - by unclevinny86 - 04-18-2021, 07:22 AM
RE: Philco 41-280 NO Sound - by vecher - 05-01-2021, 02:49 PM
RE: Philco 41-280 NO Sound - by Radioroslyn - 05-01-2021, 04:01 PM
RE: Philco 41-280 NO Sound - by morzh - 05-01-2021, 07:21 PM
RE: Philco 41-280 NO Sound - by vecher - 05-02-2021, 03:29 PM
RE: Philco 41-280 NO Sound - by vecher - 05-02-2021, 06:56 PM



Users browsing this thread:
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently 2875 online users. [Complete List]
» 1 Member(s) | 2874 Guest(s)
Avatar

>