05-04-2021, 03:47 PM
Audio transformers installed and soldered into place. Remains of some of the old transformer wiring was not soldered in placed. Just a hook of bare wire loosely crimped in place then taped with cloth tape. Thought I had never worked on a radio this old. Evidence shows I've worked on this one before.
While no transformers were in the chassis, removed the rheostat panel and cleaned all contact points along with on / off switch. Looks like the antenna tap switch is put together similar to the rheostat panel. Will give it a clean up next.
While no transformers were in the chassis, removed the rheostat panel and cleaned all contact points along with on / off switch. Looks like the antenna tap switch is put together similar to the rheostat panel. Will give it a clean up next.