Kurt P
|
Terry, gotcha, thanks for the clarification. That’s probably why the speaker seems shorted. Assuming the OT/FC/speaker...Kurt P — 10:59 AM |
Radiola 18 Amplifier & PS
|
I have the 2.25V and 2.5V information confused, and must look more carefully at the schematic and Hammond transformer in...TN Allen — 10:24 AM |
Radiola 18 Amplifier & PS
|
Thank you for the information, it all helps, although understanding some of it takes time. One reason for doing the PS a...TN Allen — 09:42 AM |
462ron
|
Hi Mike, the radio is coming along nicely but wow, you must have some serious moisture in your shop judging by the amoun...462ron — 06:29 AM |
Restoring Philco 37-604C
|
Have rebuilt the can.
The can had 4 caps in it, 2x16uF, 10uF and 8uF.
I used a 15uF as the first cap, 22uF and 10uF ...morzh — 09:38 PM |
Philco 89B code 123 newbie
|
The flat copper wires are from the hum bucking coil. All of the other resistances seem to be OK.Radioroslyn — 04:15 PM |
Help with weston 669
|
I need help with my 669 meter. I recapped it becausing it was pegging the meter out. Now the neon light comes on (not su...daveone23 — 02:42 PM |
Philco 89B code 123 newbie
|
I may be incorrect but you should measure around few ohms for the voice coil. In addition you may have a hum bucking coi...RodB — 02:29 PM |
Philco 10 car radio head key
|
I recently acquired a 1932-33 Philco 10 Transitone car radio. The head has a key slot and the key is missing. I found a ...Keandkafu — 01:33 PM |
Philco 89B code 123 newbie
|
Well it looks like I jumped the gun. :lol: Brought it up slowly on a variac and at about 30V it was drawing .24A and ...Kurt P — 12:30 PM |