Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My RCA C9-4
#1

Today my RCA C9-4 arrived safe and sound ! I must compliment the seller. Communications regarding the shipping was excellent, and he did a wonderful job of packing it. I advised him to go to Harbor Freight and buy mover's blankets and use those for wrapping it and padding instead of Styrofoam, which he did. It saved a HUGE load of mess, and made unwrapping it a whole lot easier. I really look forward to restoring it. I am VERY happy looking at the grill cloth. It is PERFECT ! The cabinet is in pretty good shape too. I will have to do a little re-gluing of the top to the rest of the cabinet, along with some of the little triangular pieces used to help tie the top to the rest of the cabinet, but, other than that it is fine, and will clean up nicely. I don't think I will have to do more than clean it well with Go-Jo, and then give it a coat or two of tung oil to bring back the gloss. I took these pictures of it right after I finished unpacking it.

[Image: https://64.media.tumblr.com/be2596a7c767...6197b6.jpg]

[Image: https://64.media.tumblr.com/af5b5bf7e15a...6b439f.jpg]

[Image: https://64.media.tumblr.com/f2fdd205abd3...f987fd.jpg]


Messages In This Thread
My RCA C9-4 - by mikethedruid - 07-29-2021, 06:16 PM
RE: My RCA C9-4 - by mikethedruid - 07-29-2021, 08:25 PM
RE: My RCA C9-4 - by mikethedruid - 07-30-2021, 10:26 PM
RE: My RCA C9-4 - by Dan Walker - 07-31-2021, 09:53 AM
RE: My RCA C9-4 - by mikethedruid - 07-31-2021, 01:18 PM
RE: My RCA C9-4 - by mikethedruid - 07-31-2021, 01:44 PM
RE: My RCA C9-4 - by mikethedruid - 08-01-2021, 02:50 PM
RE: My RCA C9-4 - by Phlogiston - 08-01-2021, 03:24 PM
RE: My RCA C9-4 - by mikethedruid - 08-01-2021, 04:04 PM
RE: My RCA C9-4 - by mikethedruid - 08-01-2021, 07:48 PM
RE: My RCA C9-4 - by PhilcoMike - 08-02-2021, 02:47 PM
RE: My RCA C9-4 - by mikethedruid - 08-03-2021, 03:40 PM
RE: My RCA C9-4 - by mikethedruid - 08-07-2021, 04:27 PM
RE: My RCA C9-4 - by mikethedruid - 08-07-2021, 05:51 PM
RE: My RCA C9-4 - by mikethedruid - 08-08-2021, 12:02 AM
RE: My RCA C9-4 - by mikethedruid - 08-08-2021, 06:05 AM
RE: My RCA C9-4 - by David - 08-08-2021, 09:38 AM
RE: My RCA C9-4 - by mikethedruid - 08-08-2021, 09:06 PM
RE: My RCA C9-4 - by Paul Philco322 - 08-09-2021, 06:38 PM
RE: My RCA C9-4 - by mikethedruid - 08-09-2021, 07:41 PM
RE: My RCA C9-4 - by mikethedruid - 08-09-2021, 09:40 PM
RE: My RCA C9-4 - by mikethedruid - 08-14-2021, 03:18 PM
RE: My RCA C9-4 - by mikethedruid - 08-14-2021, 10:08 PM
RE: My RCA C9-4 - by Paul Philco322 - 08-15-2021, 09:23 AM
RE: My RCA C9-4 - by Ron Ramirez - 08-15-2021, 12:14 PM
RE: My RCA C9-4 - by mikethedruid - 08-15-2021, 12:48 PM
RE: My RCA C9-4 - by Paul Philco322 - 08-15-2021, 01:35 PM
RE: My RCA C9-4 - by mikethedruid - 08-15-2021, 03:40 PM
RE: My RCA C9-4 - by mikethedruid - 08-16-2021, 02:47 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM

[-]
Who's Online
There are currently 5562 online users. [Complete List]
» 1 Member(s) | 5561 Guest(s)
Avatar

>