09-06-2021, 11:57 AM
I’m sure I have the cord installed the same as the diagram. The pointer rides on the bottom of the scale witch is the only way it will fit. The cord for the pointer comes off the top of the top of the drive wheel and goes to the left along the top to the first pulley.
With this setup a counter clockwise turn of the tuning knob moves the pointer to the right towards the top of the AM band. The large drive wheel is attached directly to the tuning condenser. The tuning condenser is tuning stations (455 fully closed, counter clockwise, and 1600 fully open clockwise), but for this setup to move the pointer to work it would have to be opposite. Is it possible the tuning condenser is backwards in its operation?
With this setup a counter clockwise turn of the tuning knob moves the pointer to the right towards the top of the AM band. The large drive wheel is attached directly to the tuning condenser. The tuning condenser is tuning stations (455 fully closed, counter clockwise, and 1600 fully open clockwise), but for this setup to move the pointer to work it would have to be opposite. Is it possible the tuning condenser is backwards in its operation?