Philco 90 restoration

Thread Rating:

1 Vote(s) - 5 Average
1
2
3
4
5

Linear Mode

Philco 90 restoration

Bob Andersen
Phorum Expert

Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL

#59

10-27-2021, 12:08 AM

It fails consistently about 5-10 minutes from a cold start.

-2 volts is the lowest voltage I've measured and that's with respect to ground. The cathodes are about 20 volts positive with respect to ground.

So that makes the grids around -20 to -22 volts with respect to the cathodes.

Thank you for all the suggestions. I'll replace the rest of the resistors and go over the mechanical connections.

Meanwhile I had fun digging through my stash for 24 tubes to try.
[Image: https://live.staticflickr.com/65535/5163...25a6_c.jpg]

Seems to take longer to warm up and get good reception using 24s versus 24As. Here's a set of NOS RCA tubes I have in the set currently.
[Image: https://live.staticflickr.com/65535/5163...b1e5_c.jpg]

(This post was last modified: 10-27-2021, 12:12 AM by Bob Andersen.)

Website Find

« Next Oldest | Next Newest »

Messages In This Thread

Philco 90 restoration - by Bob Andersen - 09-18-2021, 01:16 AM

RE: Philco 90 restoration - by Ron Ramirez - 09-18-2021, 11:42 AM

RE: Philco 90 restoration - by morzh - 09-18-2021, 03:20 PM

RE: Philco 90 restoration - by Ron Ramirez - 09-18-2021, 03:54 PM

RE: Philco 90 restoration - by klondike98 - 09-18-2021, 04:36 PM

RE: Philco 90 restoration - by Bob Andersen - 09-19-2021, 12:22 AM

RE: Philco 90 restoration - by Bob Andersen - 09-19-2021, 12:32 AM

RE: Philco 90 restoration - by Arran - 09-19-2021, 02:02 AM

RE: Philco 90 restoration - by Bob Andersen - 09-19-2021, 02:30 PM

RE: Philco 90 restoration - by Steve Davis - 09-19-2021, 03:53 PM

RE: Philco 90 restoration - by Bob Andersen - 09-19-2021, 05:18 PM

RE: Philco 90 restoration - by Ron Ramirez - 09-19-2021, 07:55 PM

RE: Philco 90 restoration - by morzh - 09-19-2021, 08:40 PM

RE: Philco 90 restoration - by Steve Davis - 09-19-2021, 09:44 PM

RE: Philco 90 restoration - by morzh - 09-19-2021, 10:06 PM

RE: Philco 90 restoration - by Simon Wa3uay - 09-20-2021, 04:42 PM

RE: Philco 90 restoration - by Bob Andersen - 09-20-2021, 05:35 PM

RE: Philco 90 restoration - by Bob Andersen - 09-20-2021, 05:56 PM

RE: Philco 90 restoration - by Bob Andersen - 09-21-2021, 12:23 AM

RE: Philco 90 restoration - by Bob Andersen - 09-23-2021, 06:52 PM

RE: Philco 90 restoration - by morzh - 09-23-2021, 08:31 PM

RE: Philco 90 restoration - by Bob Andersen - 09-23-2021, 10:39 PM

RE: Philco 90 restoration - by morzh - 09-23-2021, 11:53 PM

RE: Philco 90 restoration - by Steve Davis - 09-24-2021, 10:12 AM

RE: Philco 90 restoration - by madsowry - 09-26-2021, 09:12 PM

RE: Philco 90 restoration - by Bob Andersen - 09-27-2021, 01:42 AM

RE: Philco 90 restoration - by Bob Andersen - 09-27-2021, 07:39 PM

RE: Philco 90 restoration - by mikethedruid - 09-27-2021, 08:34 PM

RE: Philco 90 restoration - by Bob Andersen - 09-27-2021, 09:02 PM

RE: Philco 90 restoration - by Bob Andersen - 10-01-2021, 04:49 PM

RE: Philco 90 restoration - by morzh - 10-01-2021, 06:12 PM

RE: Philco 90 restoration - by MrFixr55 - 10-02-2021, 08:42 AM

RE: Philco 90 restoration - by Greg - 10-03-2021, 12:53 PM

RE: Philco 90 restoration - by Bob Andersen - 10-03-2021, 04:55 PM

RE: Philco 90 restoration - by morzh - 10-03-2021, 11:13 PM

RE: Philco 90 restoration - by Bob Andersen - 10-07-2021, 02:20 AM

RE: Philco 90 restoration - by morzh - 10-07-2021, 08:19 PM

RE: Philco 90 restoration - by Arran - 10-10-2021, 02:38 AM

RE: Philco 90 restoration - by morzh - 10-10-2021, 12:09 PM

RE: Philco 90 restoration - by Bob Andersen - 10-19-2021, 03:15 PM

RE: Philco 90 restoration - by Phlogiston - 10-19-2021, 03:39 PM

RE: Philco 90 restoration - by Arran - 10-21-2021, 02:25 AM

RE: Philco 90 restoration - by morzh - 10-21-2021, 12:19 PM

RE: Philco 90 restoration - by Bob Andersen - 10-23-2021, 02:20 PM

RE: Philco 90 restoration - by Bob Andersen - 10-26-2021, 04:16 PM

RE: Philco 90 restoration - by Paul Philco322 - 10-26-2021, 05:53 PM

RE: Philco 90 restoration - by Ron Ramirez - 10-26-2021, 06:19 PM

RE: Philco 90 restoration - by Bob Andersen - 10-26-2021, 06:52 PM

RE: Philco 90 restoration - by Ron Ramirez - 10-26-2021, 07:28 PM

RE: Philco 90 restoration - by radiorich - 10-26-2021, 08:06 PM

RE: Philco 90 restoration - by Steve Davis - 10-26-2021, 08:22 PM

RE: Philco 90 restoration - by radiorich - 10-26-2021, 09:00 PM

RE: Philco 90 restoration - by Bob Andersen - 10-26-2021, 09:36 PM

RE: Philco 90 restoration - by Bob Andersen - 10-26-2021, 10:18 PM

RE: Philco 90 restoration - by BrendaAnnD - 10-26-2021, 11:02 PM

RE: Philco 90 restoration - by radiorich - 10-26-2021, 11:08 PM

RE: Philco 90 restoration - by Steve Davis - 10-26-2021, 11:34 PM

RE: Philco 90 restoration - by radiorich - 10-26-2021, 11:58 PM

RE: Philco 90 restoration - by Bob Andersen - 10-27-2021, 12:08 AM

RE: Philco 90 restoration - by Bob Andersen - 10-27-2021, 05:44 PM

RE: Philco 90 restoration - by Bob Andersen - 10-27-2021, 07:14 PM

RE: Philco 90 restoration - by radiorich - 10-27-2021, 07:38 PM

RE: Philco 90 restoration - by Bob Andersen - 10-29-2021, 05:02 PM

RE: Philco 90 restoration - by morzh - 10-29-2021, 09:15 PM

RE: Philco 90 restoration - by Bob Andersen - 10-30-2021, 12:54 AM

RE: Philco 90 restoration - by radiorich - 10-30-2021, 01:31 AM

RE: Philco 90 restoration - by Arran - 11-02-2021, 08:09 PM

RE: Philco 90 restoration - by Bob Andersen - 11-03-2021, 01:11 AM

RE: Philco 90 restoration - by Bob Andersen - 11-03-2021, 10:35 PM

RE: Philco 90 restoration - by radiorich - 11-04-2021, 01:02 AM

RE: Philco 90 restoration - by Bob Andersen - 11-04-2021, 01:26 PM

RE: Philco 90 restoration - by Bob Andersen - 11-06-2021, 01:32 AM

RE: Philco 90 restoration - by radiorich - 11-06-2021, 01:53 PM

RE: Philco 90 restoration - by OZ4 - 11-06-2021, 07:22 PM

RE: Philco 90 restoration - by Bob Andersen - 11-10-2021, 02:21 AM

RE: Philco 90 restoration - by Bob Andersen - 11-17-2021, 05:35 PM

RE: Philco 90 restoration - by Bob Andersen - 11-17-2021, 06:13 PM

RE: Philco 90 restoration - by Bob Andersen - 11-17-2021, 06:55 PM

RE: Philco 90 restoration - by Bob Andersen - 11-17-2021, 07:45 PM

RE: Philco 90 restoration - by Bob Andersen - 11-19-2021, 11:58 AM

RE: Philco 90 restoration - by Steve Davis - 11-19-2021, 12:24 PM

RE: Philco 90 restoration - by Steve Davis - 11-19-2021, 12:37 PM

RE: Philco 90 restoration - by Bob Andersen - 11-19-2021, 02:11 PM

RE: Philco 90 restoration - by Steve Davis - 11-19-2021, 04:33 PM

RE: Philco 90 restoration - by Phlogiston - 11-20-2021, 12:05 PM

RE: Philco 90 restoration - by radiorich - 11-20-2021, 12:42 PM

RE: Philco 90 restoration - by cknob - 11-23-2021, 04:23 PM

RE: Philco 90 restoration - by Bob Andersen - 11-25-2021, 02:33 AM

RE: Philco 90 restoration - by cknob - 11-25-2021, 10:30 AM

RE: Philco 90 restoration - by Bob Andersen - 11-26-2021, 10:29 PM

RE: Philco 90 restoration - by morzh - 11-26-2021, 11:44 PM

RE: Philco 90 restoration - by Arran - 11-28-2021, 08:33 AM

RE: Philco 90 restoration - by Bob Andersen - 11-28-2021, 03:14 PM

RE: Philco 90 restoration - by Bob Andersen - 11-29-2021, 03:36 AM

RE: Philco 90 restoration - by cknob - 11-29-2021, 08:51 AM

RE: Philco 90 restoration - by radiorich - 11-29-2021, 09:06 AM

RE: Philco 90 restoration - by cknob - 11-29-2021, 10:03 AM

RE: Philco 90 restoration - by RodB - 11-29-2021, 10:43 AM

RE: Philco 90 restoration - by mikethedruid - 11-29-2021, 10:44 AM

RE: Philco 90 restoration - by RodB - 11-29-2021, 10:54 AM

RE: Philco 90 restoration - by Bob Andersen - 11-29-2021, 11:08 AM

RE: Philco 90 restoration - by cknob - 11-29-2021, 11:21 AM

RE: Philco 90 restoration - by RodB - 11-29-2021, 11:57 AM

RE: Philco 90 restoration - by morzh - 11-29-2021, 01:15 PM

RE: Philco 90 restoration - by Steve Davis - 11-29-2021, 01:54 PM

RE: Philco 90 restoration - by Bob Andersen - 11-29-2021, 05:30 PM

RE: Philco 90 restoration - by Ron Ramirez - 11-29-2021, 07:07 PM

RE: Philco 90 restoration - by cknob - 12-01-2021, 03:39 PM

RE: Philco 90 restoration - by Steve Davis - 12-01-2021, 09:23 PM

RE: Philco 90 restoration - by Ron Ramirez - 12-01-2021, 10:08 PM

RE: Philco 90 restoration - by Steve Davis - 12-01-2021, 10:47 PM

RE: Philco 90 restoration - by cknob - 12-02-2021, 08:22 AM

RE: Philco 90 restoration - by Arran - 12-04-2021, 04:19 AM

RE: Philco 90 restoration - by Simon Wa3uay - 12-04-2021, 11:29 AM

RE: Philco 90 restoration - by Bob Andersen - 12-09-2021, 02:21 AM

RE: Philco 90 restoration - by radiorich - 12-09-2021, 02:29 AM

View a Printable Version

Users browsing this thread: 7 Guest(s)

Recent Posts
Shadow Meter Bulb
Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM
Philco 41-608 changer coupler
3D-printing...short of machining, of course. Or molding.morzh — 05:20 PM
Philco 41-608 changer coupler
Thanks, Morzh. That solves the issue of the rubber pieces. Now, I need to find a way to replicate the pot metal piec...alangard — 05:07 PM
12' Philco
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel. Kareem would have an e...morzh — 01:48 PM
12' Philco
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM
Hickok AC51 tube tester
I think they have only shown the secondaries of the transformer. Two of them feed the rectifiers' filaments.morzh — 12:58 PM
IF can wire size and Rubber mounts?
Arran If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM
12' Philco
Rod, Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently. H...morzh — 12:54 PM
Hickok AC51 tube tester
Absolutely no one is going to reverse engineer that circuit. Even the iron core is missing.RodB — 10:37 AM
IF can wire size and Rubber mounts?
Thanks to both members for your help regarding wire and tuner mtg supports. regards--Johngeorgetownjohn — 09:33 AM

Who's Online

There are currently 6140 online users. [Complete List]
» 2 Member(s) | 6138 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me