11-06-2021, 08:45 PM
Mike, looks good!
Question: do you put a solid "liner" or something inside the can, before you glue the can back together? I tried a similar rebuild process a couple years ago, and found that putting the can back together with just epoxy resulted in an unstable joint, that came apart when I clamped it back into the chassis. I didn't put in the fish paper...maybe that's the trick. The epoxy would saturated the paper at the joint, and be the backing needed.
Question: do you put a solid "liner" or something inside the can, before you glue the can back together? I tried a similar rebuild process a couple years ago, and found that putting the can back together with just epoxy resulted in an unstable joint, that came apart when I clamped it back into the chassis. I didn't put in the fish paper...maybe that's the trick. The epoxy would saturated the paper at the joint, and be the backing needed.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
